00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第22页
Operational Safety Warning Labels W201, W203, W204 and W210 on the Machine Warning Labels Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 22 Warning Label W203 2.2.1.2 Warning Label W203 Warning Label W204 2.2.1.3 Warn…
Operational Safety
Warning Labels Warning Labels W201, W203, W204 and W210 on the Machine
21 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Warning labels W203, W204 and W210 on the placement system - part 2
▪
W203, article no. 03009342-01 (quantity per machine: 4)
▪
W204, article no. 03009343-01 (quantity per machine: 8)
▪
W210, article no. 03009350-01 (quantity per machine: 2)
Warning Label W201
2.2.1.1 Warning Label W201
WARNING
Do not use abrasive cleaners or solvents for cleaning warning labels.
Replace any damaged or illegible warning labels.
SAFE OPERATION OF THE MACHINE
Safe operation of the machine depends absolutely on the operator being
familiar with the operating manual and safety instructions and putting them
into effect.
Item No. 03009338-01
Operational Safety
Warning Labels W201, W203, W204 and W210 on the Machine Warning Labels
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 22
Warning Label W203
2.2.1.2 Warning Label W203
Warning Label W204
2.2.1.3 Warning Label W204
Warning Label W210
2.2.1.4 Warning Label W210
Safety Instruc tions
2.2.1.5 Safety Instructions
Any staff working on the machine must be familiar with the safety instructions in this user manual and
observe these at all times.
The following safety instructions are an excerpt from Chapter 1 "Operational Safety" of the SIPLACE
user manual.
Safety of Op erators and Ot her Persons
Safety of Operators and Other Persons
Machine operators must only carry out work for which they have been adequately trained and with which
they are totally familiar.
Safety of Plan t and Equipme nt
Safety of Plant and Equipment
▪ Never make changes, however minor, unless you are totally aware of the effect they will have on the
overall functioning of the system.
▪ The stations must always be set up, retooled and maintained by appropriately trained personnel.
▪ Only use original SIPLACE spare parts and authorized accessories. The use of other parts will affect
safety and will invalidate the liability for any consequential damage.
DANGER OF CRUSHING!
Reaching in here can lead to injuries to the arms and hands.
Do not reach into the machine while it is running
Item No. 03009342-01
DANGER OF CRUSHING!
Reaching in here can lead to injuries to the arms and hands.
Do not reach into the machine while it is running
Item no. 03009343-01
Warning label on the emergency stop button
Item no. 03009350-01
WARNING
The system is electrically driven. When electrical devices are in use, certain parts carry
dangerous voltage levels.
► Switch off at the main switch and disconnect the placement system from the power supply
before carrying out any work on live components.
► Lock the machine.
Operational Safety
Warning Labels Warning label W202 on the gantries
23 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
▪ Do not make modifications to the safety equipment. Never bridge protective switches or remove
protective devices.
Warning label W202 on the g antries
2.2.2 Warning label W202 on the gantries
Warning label W202 on the gantries
W202, article no. 03009341-01
W202, in fig. , article no. 03009341-01
(quantity per X2 machine: 6, X3 machine: 7, X4 machine: 8)
WARNING
Powerful permanent magnetic fields inside the machine
DANGER
Risk of death for persons with active implants (e.g. pacemakers, insulin pumps, defibrillators).