4OM-1603-007_w.pdf - 第10页
7 1OM-1603 1 108-003 Installation/T ransfer and After-Sale Service (1) Installation/T ransfer (a) Do not install or transfer the machine on the customer side after shipment. T o ensure perfect opera tion of the machine, …
6
1OM-1603
1012-003
(l) The system is broken down due to the use of parts purchased through a sales
route other than the ones authorized by our company (The maintenance parts
dealing companies are specied by our company).
In no event shall Hitachi be liable for any warranty other than the express one here
and any implied warranties of merchantability or tness for any particular purpose.
In addition, Hitachi is not liable for any direct or indirect loss or damages whatsoever,
whether based upon express or implied warranty.
No oral or written information, or advice/suggestion given by Hitachi (its executives,
employees, agencies and all concerned) to the original purchaser or a third party
shall create a warranty or obligation to Hitachi, regarding the conformity with the
performance of the machine. Formally approved information or advice/suggestion are
excluded.
Hitachi is not responsible for any damage to the provided application software or loss
of data, arising from any damage to this machine.
(4) WarrantyCerticate
This certicate cannot be reissued. Please keep this in a safe place.
7
1OM-1603
1108-003
Installation/Transfer and After-Sale Service
(1) Installation/Transfer
(a) Do not install or transfer the machine on the customer side after shipment.
To ensure perfect operation of the machine, including safety and accuracy, only
the marketing department or sales agency of Hitachi High-Technologies will
install the machine or transfer it to another place.
(b) Before the machine is installed, the installation site must be properly prepared
on the customer side to ensure the installation requirements described in the
instruction manual.
(c) When the machine should be transferred to another place, please contact
the marketing department or sales agency of Hitachi High-Technologies
beforehand to avoid any trouble related to the transfer.
When the machine is transferred to another place without prior notice to us, it
may break down or malfunction.
In that case, we will in no way be liable for any damage to the machine
regardless of the possibility of any or such damages arising from the
displacement.
Example of Failure and Malfunctions after Machine Transfer:
Frequency and voltage difference in local site may cause a machine
malfunction.
The surrounding circumstances (electromagnetic radiation obstruction or
noises) may cause a machine malfunction.
(2) After-Sale Service
(a) Contact the marketing department or sales agency of Hitachi High-
Technologies for after-sale servicing.
(b) Consult us for maintenance contracts, inspections and servicing contracts, etc.,
after expiration of the warranty.
Requirements, Orientation, and Training for Operators
Only well-trained personnel should operate the machine.
Mishandling of the machine will cause a major accident.
We offer orientation and training sessions, using our facilities or local ones to ensure perfect
operation of the machine, including safety and accuracy.
Consult the marketing department or sales agency of Hitachi High-Technologies for the
training application. (Training Fee Charged)
8
1OM-1603
0908-002
AboutSpecicationChange
Consult the marketing department or sales agency of Hitachi High-Technologies for desired
changes of the machine specications.
In no event will we be liable for any direct, indirect, special, incidental, or consequential
damages resulting from any modication made without any prior notice in a written form.
About Disposal of Machine
Strong permanent magnets are used in the moving mechanisms of the X- and Y-axis linear
sections.
The disposal of the machine in whole or part must be distinguished from wastes of the
common man's living.
Contact the marketing department or sales agency of Hitachi High-Technologies for the
detailed information on the machine disposal.
Other Precautionary Items
Trade Marks and Registered Trade Marks
Windows is a registered trademark of the Microsoft Corporation in the United States
and other countries.
All other corporate and product names in this manual are owned by and are the
trademarks or registered trademarks of their respective companies.
Neither (TM) nor (R) marks are described clearly in this manual.