4OM-1603-007_w.pdf - 第43页

Safety Precautions Safe-32 1OM-1603 1 108-002 No. Alert Labels and Description (22) Description  Unless the lter holder is set correctly in place, a pickup error will occur or the lter will come off and cause an inter…

100%1 / 379
Safety Precautions
Safe-31
1OM-1603
5. Alert Labels
1108-005
No. Alert Labels and Description
(19)
Description
Attach the nozzles correctly in the nozzle stockers (housings).
Do not operate the machine with a nozzle being left on the nozzle stocker shutter.
Otherwise, the machine may break down.
(20)
Description
If you put your hand or a heavy object on the backup table while working inside the
machine, the backup table may become deformed due to an excessive load.
(21)
Description
Keep the linear guide grooves clear of any object. Otherwise, an object in the
groove may be trapped in the moving part, causing the machine to be damaged.
Safety Precautions
Safe-32
1OM-1603
1108-002
No. Alert Labels and Description
(22)
Description
Unless the lter holder is set correctly in place, a pickup error will occur or the
lter will come off and cause an interference with a head. The head may also be
damaged.
(23)
Description
Be sure to read the instruction manual carefully for correct operations before use.
If the machine is operated incorrectly, it might cause a breakdown of the machine.
(24)
10-0289-
The connector located on the lower section is not a LAN connector.
Do not connect it to anything except for the specified conveyor cable.
Description
Do not connect any conveyor cable other than specied.
If any conveyor cable other than specied one is connected, the machine may break
down.
(25)
10-0304-
Do not touch your hand to the Reference Mark Block.
When a strong force is given to the reference mark block,
it might be deformed.
Description
Do not put your hand on the reference mark block.
When a strong force is given to the reference mark block, it might be deformed.
5. Alert Labels
Safety Precautions
Safe-33
1OM-1603
1108-004
6. Precautionary Items for Correct Operations
6. Precautionary Items for Correct Operations
Requirements for Installation
Besuretofulllthefollowingrequirementsforsafetypurposes.
•
Overvoltage Category : Category
III
•
Pollution Degree : 3
•
Altitude : 1,000 m or less above the sea level
Overvoltage Categories refer to the level of Impulse Withstand Voltage protection
provided at the specied Pollution Degree.
Category III : Primary circuits of a device to which power is directly supplied
from the power distribution panel, and circuits from the
distribution panel to outlets.
Note
The term was changed from "Installation Category" to "Overvoltage Category".
"Pollution Degree" is a degree of pollution severity.
Pollution Degree 3 : Conductive pollution or dry nonconductive pollution that be-
comes conductive due to condensation occurs. To be found in
industrial environment or construction sites (harsh environ-
ments).
Altitude means the height above sea level of the place where the machine is to be used.
Note
When the machine is used in a place that has an altitude of 1,000 meters or more,
consult with the Marketing Dept of Hitachi High Technologies or a sales agent.