4OM-1603-007_w.pdf - 第156页
4OM-1603 2-25 3. Machine Information : Chap.2 3. Machine Information 3.1 Machine Information Window In this window, various machine information items are displayed during the machine operation. Note The machine is not st…
4OM-1603
2-24
2. Management Information : Chap.2
1109-001
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
0d1602 Large nozzle interference
Operation is impossible because large nozzles are placed in 2 axes adjacent to
the head1.
Please take off one of them by hand, and then edit the nozzle arrangement data.
0d1603 Large nozzle interference
Operation is impossible because large nozzles are placed in 2 axes adjacent to
the head2.
Please take off one of them by hand, and then edit the nozzle arrangement data.
0d1604 Large nozzle interference
It cannot run because a large nozzle runs to the interfering position.
0d1701 Non-applied function of the long board
The function is not applied to PCB which is longer than 610mm.
0d1801 Transferconrmation
The machine has not stopped.
0d1901 Bowl Feeder
Bowl feeder cart(Block1) has not been set. Please check a type of the cart. And,
Please check the setting for unit exchange screen.
0d1902 Bowl Feeder
Bowl feeder cart(Block2) has not been set. Please check a type of cart. And,
Please check the setting for unit exchange screen.
0d2001 Non-applied function of backup jig support to vacuum
The function is not available if backup jig to support vacuum is applied.
T4B1
4OM-1603
2-25
3. Machine Information : Chap.2
3. Machine Information
3.1 Machine Information Window
In this window, various machine information items are displayed during the
machine operation.
Note
The machine is not stopped with this indication.
[1]
[4]
[3]
[2]
[5] [6]
F4B3
[1] Machine Information Code
The machine information code is described in this text box.
[2] Display Area A
The outline of the machine information is displayed in this area.
[3] Display Area B
The details of the machine information are displayed in this area.
[4] Display Area C
The check procedure for the machine information item is displayed in this
area.
[5] [Clear Alm] Button
When this button is pressed, only the alarm buzzer is cancelled.
[6] [OK] Button
When this button is pressed, the "Machine Information" window is closed.
[7] Error Display
When a full previous notice of the cover tape has occurred (Error code
0x802401), the feeder number and the image are displayed. (Three subjects
can be displayed in order from the left)
1202-006
4OM-1603
2-26
3. Machine Information : Chap.2
3.2 Machine Information List
Machine
Information Code
Display Area A (The outline of the Machine Information)
Display Area B (The details of the Machine Information)
800301 Warning: Decreasing of Comp. Hdlg. Rate(For Nozzle.)
Nozzle message rate :
-----
800302 Warning: Decreasing of Comp. Hdlg. Rate(For Nozzle.)
The rate of nozzle adsorption fell. A cycle stop is carried out.
-----
800401 Warning: Decreasing of Comp. Hdlg. Rate(For Fdr.)
Feeder message rate :
-----
800402 Warning: Decreasing of Comp. Hdlg. Rate(For Fdr.)
The rate of nozzle adsorption fell. A cycle stop is carried out.
-----
800505 Alternated Tray Magazine Axis
Shortage of component
-----
800601 Alternated Feeder
Shortage of component
-----
800602 Alternated Feeder
Splice waiting
-----
800603 Alternated Feeder
Comp. Vertical(sensor)
-----
800604 Alternated Feeder
Comp. Thickness(sensor)
-----
800605 Alternated Feeder
Comp. Missing(sensor)
-----
800606 Alternated Feeder
Comp. Recog. Error(recog.)
-----
800607 Alternated Feeder
Comp. Missing(recog.)
-----
800608 Alternated Feeder
Coplanarity Check Error
-----
800609 Alternated Feeder
The feeder at the alternation destination is invalid. Please set it effectively.
-----
1012-005