4OM-1603-007_w.pdf - 第150页
4OM-1603 2-19 2. Management Information : Chap.2 1 109-006 Management Information Code Display Area A (The outline of the Management Information) Display Area B (The details of the Management Information) 050501 Convert …
4OM-1603
2-18
2. Management Information : Chap.2
1109-006
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
050213 ConrmationofP.C.B.existence
Please remove the substrate at A lane upstream position.
The substrate for weight to exceed 2.5kg cannot be transported simultaneously.
050214 ConrmationofP.C.B.existence
Please remove the substrate at B lane upstream position.
The substrate for weight to exceed 2.5kg cannot be transported simultaneously.
050301 ConrmationofFirmwareversion
Firmware of transfer driver is not the latest version. Please update it.
050401 Manual transfer
P.C.B. (X>260mm) which is set by PP data is unable to take Input Position.
050402 Manual transfer
Please operate after removing P.C.B. from output conveyor. There is a possibility
of pushing and rising with Stopper.
050403 Manual transfer
It is impossible to take from Sensor Detection of Input Position.
Please put P.C.B. on Input Conveyor, or move it to Output position in Recovery
Menu.
050404 Manual transfer
PCB (X>260mm) which is set by PP data is unable to be taken in Input Conveyor.
050405 Manual transfer
There is PCB on Deceleration Sensor of Input Conveyor. There is a possibility that
PCB is inserted.
050406 Manual transfer
There is PCB on Deceleration Sensor of Shuttle Conveyor in Output side. There
is a possibility that PCB is inserted.
050407 Manual transfer
Lane A is not able to be set in Current Program. Please change Current Program
or change to Lane B.
050408 Manual transfer
Lane B is not able to be set in Current Program. Please change Current Program
or change to Lane A.
050409 Manual transfer
PCB Y size and Conveyor Width in Current Program are not equal. Please change
Current Program.
05040a Manual transfer
Cutout PCB cannot be taken in input position.
05040b Manual transfer
Please remove PCB from input position.
Cutout PCB cannot be transferred from input position.
05040c Manual transfer
Itisnotpossibletotransportittothespeciedposition.
05040d Manual transfer
It is not possible to operate because it interferes in the adsorption treatment
device.
05040e Manual transfer
It composes the device, and it is not possible to operate.
4OM-1603
2-19
2. Management Information : Chap.2
1109-006
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
050501 Convert Width Setup
Please set conveyor width 49.5~461.5mm.
The total of PCB size/offset/clearance is over movable range.
050502 Convert Width Setup
Please set conveyor width 49.5~382.5mm.
The total of PCB size/offset/clearance is over movable range.
050503 Convert Width Setup
Movable Range for the destination of W1 is set.
Please check P.C.B. size/offset/clearance of Lane A.
050504 Convert Width Setup
Movable Range for the destination of W1 is set.
Please check P.C.B. size/offset/clearance of Lane A.
050505 Convert Width Setup
Movable Range for the destination of W2 is set.
Please check P.C.B. size/offset/clearance of Lane A
050506 Convert Width Setup
Movable Range for the destination of W2 is set.
Please check P.C.B. size/offset/clearance of Lane A.
050507 Convert Width Setup
Movable Range for the destination of W3 is set.
Please check P.C.B. size/offset/clearance of Lane B.
050508 Convert Width Setup
Movable Range for the destination of W3 is set.
Please check P.C.B. size/offset/clearance of Lane B.
050509 Convert Width Setup
These is a possibility of the interference with W1 and W2.
Please check P.C.B. size/offset/clearance of Lane A.
05050a Convert Width Setup
There is a possibility of the interference with W2 and W3. Please Check P.C.B.
size/offset/clearance of Lane A/B.
05050b Convert Width Setup
There is an interference between object position of Conveyor and Support Pin.
Please exchange Support Pin.
050510 Convert Width Setup
ZeroingofW1axisisnotnished.PleaseperformzeroingofW1axis.
050511 Convert Width Setup
ZeroingofW2axisisnotnished.PleaseperformzeroingofW2axis.
050512 Convert Width Setup
ZeroingofW3axisisnotnished.PleaseperformzeroingofW3axis.
050513 Convert Width Setup
The set value of W1 axis exceeds the soft limit.
Please determine the value within the range from 300.5mm to 468.5mm.
050514 Convert Width Setup
The set value of W1 axis exceeds the soft limit.
Please determine the value within the range from 368.5mm to 536.5mm.
4OM-1603
2-20
2. Management Information : Chap.2
1109-006
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
050515 Convert Width Setup
The set value of W2 axis exceeds the soft limit.
Please determine the value within the range from 250.5mm to 418.0mm.
050516 Convert Width Setup
The set value of W2 axis exceeds the soft limit.
Please determine the value within the range from 284.5mm to 452.0mm.
050517 Convert Width Setup
The set value of W3 axis exceeds the soft limit.
Please determine the value within the range from 49.5mm to 382.5mm.
050518 Convert Width Setup
The set value of W3 axis exceeds the soft limit.
Please determine the value within the range from 83.5mm to 416.5mm.
050519 Convert Width Setup
There is an interference between W1 axis and W2 axis.
Please change the value or separate the interfering axis.
05051a Convert Width Setup
There is an interference between W2 axis and W3 axis.
Please change the value or separate the interfering axis.
05051b Convert Width Setup
Please set conveyor width 83.5~511.5mm.
The total of PCB size/offset/clearance is over movable range.
050601 Middle Conveyor
Rotation Direction set of Middle Conveyor in supply side differs from Main Device
transfer direction. Please change the rotation direction of Middle conveyor.
050602 Middle Conveyor
Emergency Stop switch of middle conveyor in supply side is pressed.
Please cancel it.
050603 Middle Conveyor
Safety Cover of middle conveyor in supply side is open. Please close it.
050604 Middle Conveyor
Input Machine communication mode is set [PUSHER].
Cannot use [PUSHER] mode when Middle Conveyor is contacted.
050611 Middle Conveyor
Rotation Direction set of Middle Conveyor in output side differs from Main Device
transfer direction. Please change the rotation direction of Middle conveyor.
050612 Middle Conveyor
Emergency Stop switch of middle conveyor in output side is pressed.
Please cancel it.
050613 Middle Conveyor
Safety Cover of middle conveyor in output side is open. Please close it.
050701 Shuttle Conveyor
Emergency Stop Switch of Shuttle Conveyor in Input side is pressed. Please
cancel it.
050702 Shuttle Conveyor
The safety cover of Shuttle Conveyor in Input side is open. Please close it.