4OM-1603-007_w.pdf - 第210页

4OM-1603 3-35 3. Error IDs and Remedial Procedures : Chap.3 1 109-006 Error ID Error Name, Description, Cause, and Remedy 42310f Error in NL-L1 axis System Error on NL-L1 axis System Error of internal driver . Driver err…

100%1 / 379
4OM-1603
3-34
3. Error IDs and Remedial Procedures : Chap.3
1109-006
Error ID Error Name, Description, Cause, and Remedy
423102 Error in NL-L1 axis
Out-of-Control on NL-L1 axis was detected
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423103 Error in NL-L1 axis
Error in motor power voltage of NL-L1 axis
Motor power voltage dropped. Check out the Power supply line(48V Line)
423104 Error in NL-L1 axis
STP input on NL-L1 axis was detected
STP input is detected. The function to stop motor by Hard signal.
423105 Error in NL-L1 axis
Over-current on NL-L1 axis
Abnormalcurrentinmotoroutputlinewasdetected.Conrmthemotorwiring,
supplying power.
423106 Error in NL-L1 axis
Limit sensor(+) on NL-L1 axis was detected
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423107 Error in NL-L1 axis
Limit sensor(-) on NL-L1 axis was detected
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423108 Error in NL-L1 axis
Motor disconnection of NL-L1axis was detected
Disconnection to motor was detected.(Only stop mode)
Check the motor wiring.
423109 Error in NL-L1 axis
Error in control power voltage of NL-L1 axis
Control power for driver dropped. Check out the Power supply line.(24V Line)
42310a Error in NL-L1 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42310b Error in NL-L1 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42310c Error in NL-L1 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42310d Error in NL-L1 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42310e Error in NL-L1 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
4OM-1603
3-35
3. Error IDs and Remedial Procedures : Chap.3
1109-006
Error ID Error Name, Description, Cause, and Remedy
42310f Error in NL-L1 axis
System Error on NL-L1 axis
System Error of internal driver. Driver error is supposed if this problem happens
frequently.
423110 Error in NL-L1 axis
Communication Error on NL-L1 axis
1. Conrmconnectiontocommunicationcable.
2. ConrmPowersupply(24V).
3. ConrmthecommunicationsettingofPCIboard.
4. Conrmtheaddressofdriverandcommunicationratesetting.
5. ConrmFirmwareofDriver.
423201 Error in NL-L2 axis
Zeroing Error on NL-L2 axis
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423202 Error in NL-L2 axis
Out-of-Control of NL-L2 was detected
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423203 Error in NL-L2 axis
Error in motor power voltage of NL-L2 axis
Motor power voltage dropped. Check out the Power supply line(48V Line)
423204 Error in NL-L2 axis
STP input on NL-L2 axis was detected
STP input is detected. The function to stop motor by Hard signal.
423205 Error in NL-L2 axis
Over-current on NL-L2 axis
Abnormalcurrentinmotoroutputlinewasdetected.Conrmthemotorwiring,
supplying power.
423206 Error in NL-L2 axis
Limit sensor(+) on NL-L2 axis was detected
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423207 Error in NL-L2 axis
Limit sensor(-) on NL-L2 axis was detected
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423208 Error in NL-L2 axis
Motor disconnection of NL-L2 axis was detected
Disconnection to motor was detected.(Only stop mode)
Check the motor wiring.
423209 Error in NL-L2 axis
Error in control power voltage of NL-L2 axis
Control power for driver dropped. Check out the Power supply line.(24V Line)
42320a Error in NL-L2 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
4OM-1603
3-36
3. Error IDs and Remedial Procedures : Chap.3
1109-006
Error ID Error Name, Description, Cause, and Remedy
42320b Error in NL-L2 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42320c Error in NL-L2 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42320d Error in NL-L2 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42320e Error in NL-L2 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42320f Error in NL-L2 axis
System Error on NL-L2 axis
System Error of internal driver. Driver error is supposed if this problem happens
frequently.
423210 Error in NL-L2 axis
Communication Error on NL-L2 axis
1. Conrmconnectiontocommunicationcable.
2. ConrmPowersupply(24V).
3. ConrmthecommunicationsettingofPCIboard.
4. Conrmtheaddressofdriverandcommunicationratesetting.
5. ConrmFirmwareofDriver.
423301 Error in NA-L1 axis
Zeroing Error on NA-L1 axis
No use the function. Please check the driver-axis setting in a case error is
detected because there is a possibility of error of driver-axis setting.
423302 Error in NA-L1 axis
Out-of-Control on NA-L1axis was detected
No use the function. Please check the driver-axis setting in a case error is
detected because there is a possibility of error of driver-axis setting.
423303 Error in NA-L1 axis
Error in motor power voltage of NA-L1 axis
Motor power voltage dropped. Check out the Power supply line(48V Line)
423304 Error in NA-L1 axis
STP input on NA-L1 axis was detected
STP input is detected. The function to stop motor by Hard signal.
423305 Error in NA-L1 axis
Over-current on NA-L1 axis
Abnormalcurrentinmotoroutputlinewasdetected.Conrmthemotorwiring,
supplying power.
423306 Error in NA-L1 axis
Limit sensor(+) on NA-L1 axis was detected
No use the function. Please check the driver-axis setting in a case error is
detected because there is a possibility of error of driver-axis setting.