4OM-1603-007_w.pdf - 第41页

Safety Precautions Safe-30 1OM-1603 5. Alert Labels 1 108-005 No. Alert Labels and Description (16) 01-0035- Description  Because the temperature of this section is very high, do not touch. Doing so might cause a burn. …

100%1 / 379
Safety Precautions
Safe-29
1OM-1603
1108-004
5. Alert Labels
No. Alert Labels and Description
(13)
Description
Do not drop a feeder. Otherwise, a foot injury will result or the feeder itself may be
damaged.
Carefully handle each feeder one by one and do not drop any.
(14)
Description
Do not drop a cutter. Otherwise, a foot injury will result or the cutter itself may be
damaged.
Carefully handle each cutter one by one and do not drop any.
(15)
10-0282-
Pay attention to the moving
mechanisms!
Do not put your hand in the moving area.
Otherwise, your hand might be caught in
the moving area and injured.
Description
Be careful not to get caught.
Otherwise, a serious injury such as injury on your hand might be caused.
Safety Precautions
Safe-30
1OM-1603
5. Alert Labels
1108-005
No. Alert Labels and Description
(16)
01-0035-
Description
Because the temperature of this section is very high, do not touch. Doing so might
cause a burn.
(17)
Description
Do not put any feeder sideways nor tools on the feeder bases. Otherwise, the
machine will break down.
(18)
Description
If you put your hand or a heavy object on the backup table while working inside the
machine, the backup table may become deformed due to an excessive load.
Safety Precautions
Safe-31
1OM-1603
5. Alert Labels
1108-005
No. Alert Labels and Description
(19)
Description
Attach the nozzles correctly in the nozzle stockers (housings).
Do not operate the machine with a nozzle being left on the nozzle stocker shutter.
Otherwise, the machine may break down.
(20)
Description
If you put your hand or a heavy object on the backup table while working inside the
machine, the backup table may become deformed due to an excessive load.
(21)
Description
Keep the linear guide grooves clear of any object. Otherwise, an object in the
groove may be trapped in the moving part, causing the machine to be damaged.