4OM-1603-007_w.pdf - 第193页

4OM-1603 3-18 3. Error IDs and Remedial Procedures : Chap.3 Error ID Error Name, Description, Cause, and Remedy 405201 Detecting upper Magazine rack shutter (Block2) the rack shutter opening is detected during upper elev…

4OM-1603

3-17

3. Error IDs and Remedial Procedures : Chap.3

Error ID Error Name, Description, Cause, and Remedy

404501 Elevator Unit Clamp released (Block1)

Released clamp of elevator unit (Block1)[B15426, B15428]

Check out Elevator unit clamp sensor(B15426, B15428).

404601 Detecting pickup miss cmpnt of Tray Feeder Cart (Block1)

Detecting pickup miss cmpnt(Block1) [B15412]

1. Open the cover.

2. Conrmsuppressor,DisengagedLatchandremovethePickupmisscmpnt.

3. Close the cover and then Lock it.

404701 Detecting Feeder Disengaged Latch of Tray Feeder Cart(Block1)

Feeder Disengaged Latch is detected.(Block1)[B15412]

1. Open the cover.

2. Conrmsuppressor,DisengagedLatchandremovethePickupmisscmpnt.

3. Close the cover and then Lock it.

404801 Detecting Emergency Stop(Block2)

Emergency stop(Block2) is detected

Please turn on the main body and operate it.

404901 Tray Safety Door(Lower)(Block2)

Safety door(Lower) of tray feeder unit opened.(Block2)[S0501]

Please close the safety door(lower) and operate it.

404A01 Tray Safety Door(Upper)(Block2)

Safety door(Upper) of tray feeder unit opened.(Block2)[S0502]

Please close the safety door(upper) and operate it.

404B01 Tray Safety Door(Center)(Block2)

Safety door(Center) of tray feeder unit opened.(Block2)[S0503]

Please close the safety door(center) and operate it.

404C01 Pallet Chuck Claw(Block2)

Pallet Chuck Claw opened while elevator is moving.(Block2)[B15407, B15408]

Check out detection Sensor of closing Chucking lever of pallet (B15407, B15408).

404D01 Palletyingaway(Block2)

Palletyingawayduringelevatormoving.(Block2)[B15406]

Check out detecttion sensor of breaking out Pallet (B15406) and position of Pallet.

404E01 Detecting pickup miss cmpnt on Tray Pallet (Block2)

Pickup misscmpnt on the Pallet is detected.(Block2) [B15417]

Open the main cover and remove pickup miss components on the Tray Pallet.

404F01 Detecting pickup miss cmpnt on Tray Pallet (Block2)

Pickup miss cmpnt on the Pallet is detected.(Block2) [B15418]

Open the main cover and remove pickup miss components on the Tray Pallet.

405001 Detecting pickup miss cmpnt on Tray Pallet (Block2)

Pickup miss components on the Pallet is detected.(Block2) [B15419]

Open the main cover and remove pickup miss components on the Tray Pallet.

405101 Detecting lower Magazine rack shutter (Block2)

the rack shutter opening is detected during lower elevator moving.(Block2)

[B15521, B15523,B15525]

Check out the sensor of closing magazine rack shutter (B15521, B15523,

B15525).

1109-006

4OM-1603

3-18

3. Error IDs and Remedial Procedures : Chap.3

Error ID Error Name, Description, Cause, and Remedy

405201 Detecting upper Magazine rack shutter (Block2)

the rack shutter opening is detected during upper elevator moving.(Block2)

[B15527, B15529,B15531]

Check out the sensor of closing magazine rack shutter (B15527, B15529,

B15531).

405301 Lower magazine positioning error (Block2)

Lower magazine positioning error.(Block2)[B15526]

ConrmMagazineClamp.

405401 Upper magazine positioning error (Block2)

Upper magazine positioning error.(Block2)[B15532]

ConrmMagazineClamp.

405501 Shut-off Motor Breaker for Tray (Block2)

Tripped circuit breaker of motor (Block2)

Please turn on again after turning off and cancelling Trip mode.

405601 Shut-off safety relay of Elevator(Lower) (Block2)

Cut off safety relay of lower elevator (Block2).

Conrmthemaincircuitandsafetydoor.

405701 Shut-off safety relay of Elevator(Upper) (Block2)

Cut off safety relay of upper elevator (Block2).

Conrmthemaincircuitandsafetydoor.

405801 Released Elevator unit clamp(Block2)

Released elevator unit clamp(Block2)[B15426, B15428]

ConrmtheElevatorUnitClampSensor(B15426,B15428).

405901 Detecting pickup miss cmpnt of Tray Feeder Cart (Block2)

Pickup miss components was detected(Block2). [B15412]

1.Open the cover.

2.Conrmsuppressor,DisengagedLatchandremovethePickupmisscmpnt.

3.Close the cover and then lock it.

405A01 Detecting Feeder Disengaged Latch of Tray Feeder Cart(Block2)

Feeder Disengaged Latch is detected (Block2).[B15412]

1.Open the cover.

2.Conrmsuppressor,DisengagedLatchandremovethePickupmisscmpnt.

3.Close the cover and then lock it.

406701 Detecting pickup miss cmpnt on Tray Pallet (Block1)

Pick-up miss cmpnt is detected on Tray pallet (Block1)

Please open the main cover, and remove the pick-up miss cmpnt on Tray pallet.

406801 Detecting pickup miss cmpnt on Tray Pallet (Block1)

Pick-up miss cmpnt is detected on Tray pallet (Block1)

Please open the main cover, and remove the pick-up miss cmpnt on Tray pallet.

406901 Detecting pickup miss cmpnt on Tray Pallet (Block1)

Pick-up miss cmpnt is detected on Tray pallet (Block1)

Please open the main cover, and remove the pick-up miss cmpnt on Tray pallet.

406A01 Detecting pickup miss cmpnt on Tray Pallet (Block1)

Pick-up miss cmpnt is detected on Tray pallet (Block1)

Please open the main cover, and remove the pick-up miss cmpnt on Tray pallet.

1109-006

4OM-1603

3-19

3. Error IDs and Remedial Procedures : Chap.3

1109-001

Error ID Error Name, Description, Cause, and Remedy

406B01 Detecting pickup miss cmpnt on Tray Pallet (Block2)

Pick-up miss cmpnt is detected on Tray pallet (Block2)

Please open the main cover, and remove the pick-up miss cmpnt on Tray pallet.

406C01 Detecting pickup miss cmpnt on Tray Pallet (Block2)

Pick-up miss cmpnt is detected on Tray pallet (Block2)

Please open the main cover, and remove the pick-up miss cmpnt on Tray pallet.

406D01 Detecting pickup miss cmpnt on Tray Pallet (Block2)

Pick-up miss cmpnt is detected on Tray pallet (Block2)

Please open the main cover, and remove the pick-up miss cmpnt on Tray pallet.

406E01 Detecting pickup miss cmpnt on Tray Pallet (Block2)

Pick-up miss cmpnt is detected on Tray pallet (Block2)

Please open the main cover, and remove the pick-up miss cmpnt on Tray pallet.

407001 Detecting Head1 nozzle descending

Invalid detection of head1 nozzle descending

Please perform a zeroing.

407101 Detecting Head2 nozzle descending

Invalid detection of head2 nozzle descending

Please perform a zeroing.

407201 Pass Line detect(Head1)

Invalid detection of Pass line(Head1)

Please perform a zeroing.

407301 Pass Line detect(Head2)

Invalid detection of Pass line(Head2)

Please perform a zeroing.

408001 Nozzle interference detect adjacent to multi-functional head

Emergency stopped a head because a nozzle adjacent to it interfered.

Please perform a zeroing.

408301 Feeder opening sensor (Block 1) detect

The feeder opening sensor (Block 1) was shaded.

-----

408401 Feeder opening sensor (Block 2) detect

The feeder opening sensor (Block 2) was shaded.

-----

T4C3