4OM-1603-007_w.pdf - 第22页

Safety Precautions Safe-1 1 1OM-1603 Alert Indications described as " CAUTION " Alert Description Related Items Avoidhandandngerinjuries. • Be careful to avoid hand and nger injuries when closing the tran…

100%1 / 379
Safety Precautions
Safe-10
1OM-1603
Alert Indications described as "
WARNING
" (continued)
Alert Description Related Items
Pay close attention to the cutter blade during the maintenance
work.
•
Lack of attention will result in a hand injury, etc.
Wear gloves and take the greatest care in performing the work.
•
Be sure to attach the cutter blade cover to the cut unit during
the maintenance work for safety purposes.
"3.2.6" in "Chapter
1 (Vol. 4)"
1108-004
4. Alert Indications in Instruction Manual
Safety Precautions
Safe-11
1OM-1603
Alert Indications described as "
CAUTION
"
Alert Description Related Items
Avoidhandandngerinjuries.
•
Be careful to avoid hand and nger injuries when closing the
transparent covers.
•
Hold the handgrip rmly and open or close the cover (door type)
slowly.
"2.2.3" in
"Chapter 1 (Vol. 1)"
When the green lamp of the light tower is ON or ickering (ON and
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
"2.3.2" in
"Chapter 1 (Vol. 1)"
Beforeperforminganywork,conrmthatthe"LOCK"lampon
the operation panel is "ON" (green).
•
Ifthe"LOCK"lampisnotturnedon,themachinecanbe
operated at any time from the front and rear sides, endangering
the operators around the machine.
•
Before performing any setup work with the machine being
powered up, turn on the [PNL CHANGE] button and the
"LOCK"lamponthefrontortherearoperationpanel.
"2.3.4" in
"Chapter 1 (Vol. 1)"
Before operating the machine, conrm that there are no people around
the machine (especially, the other side of the machine operation) and no
objects such as tools and parts are left around the machine.
"3.2" in
"Chapter 1 (Vol. 1)"
"1.1.4" and
"4.1" in
"Chapter 3 (Vol. 1)"
Depending on the setting for the PCB discharge from the input machine
to this machine or from this machine to the output machine, the
conveyor may move at the moment when the PCB has been removed.
In such cases, your nger might be caught.
"3.2" in
"Chapter 1 (Vol. 1)"
1108-004
4. Alert Indications in Instruction Manual
Safety Precautions
Safe-12
1OM-1603
1108-006
4. Alert Indications in Instruction Manual
Alert Indications described as "
CAUTION
" (continued)
Alert Description Related Items
Strong Magnetism
•
Do not bring any metal of high magnetizability close to this.
Otherwise, such metal will easily be magnetized and attracted,
causing an injury to the operator or breakdown of the machine.
•
Do not bring any object such as a magnetic card and a watch
close to the machine. Such an object can easily be affected by
the magnetism.
The data of the magnetic card might be cleared or a watch, etc., may
be damaged due to the strong magnetism.
"3.4" in
"Chapter 1 (Vol. 1)"
When a tape feeder is attached or detached, be sure not to drop
it.
Otherwise, a foot injury will result or the feeder itself may be damaged.
Carefully handle each feeder one by one and do not drop any.
"3.8" in
"Chapter 1 (Vol. 1)"
"2.2.4" in
"Chapter 3 (Vol. 1)"
"3.1" in
"Chapter 3 (Vol. 1)"
"3.4.2" in
"Chapter 3 (Vol. 1)"
Hazardoustoyourhandsandngers!
·
Be sure to hold the handle to move the bank feeder change cart.
·
Be careful not to hit your hand against the cover while installing the
bank feeder change cart onto the main machine.
"3.8.1" in
"Chapter 1 (Vol. 1)"
Hazardoustoyourhandsandngers!
·
Be sure to hold the handle to move the bank feeder change cart.
"2.2.4" in
"Chapter 3 (Vol. 1)"