4OM-1603-007_w.pdf - 第115页
4OM-1603 1-60 4. Maintenance Method : Chap.1 1202-002 4.6 Nozzle Filter Insertion Procedure • For High-Speed Nozzle Procedure (1) Set the nozzle lter in the hole section. Hole Section Nozzle Filter F4A39-4 (2) Insert th…
4OM-1603
1-59
4. Maintenance Method : Chap.1
(2) Put out the pin gauge from the head of the high-speed nozzle.
High-speed nozzle
Pin gauge
F4A39-16
(3) Move the pin gauge to the direction of the length hand of pick-up hole and
remove the internal clog.
Pin gauge
High-speed nozzle
F4A39-17
(4) Blow air and blow away removed dirt (Stick and remove the ne dirts of the
high-speed nozzle head by the masking tape).
High-speed nozzle
Masking tape
F4A39-18
1202-001
4OM-1603
1-60
4. Maintenance Method : Chap.1
1202-002
4.6 Nozzle Filter Insertion Procedure
•
For High-Speed Nozzle
Procedure
(1) Set the nozzle lter in the hole section.
Hole Section
Nozzle Filter
F4A39-4
(2) Insert the lter holding block into the opening section of the lter set.
Filter Holding Block
F4A39-5
4OM-1603
1-61
4. Maintenance Method : Chap.1
1012-003
(3) Orient the nozzle lter opening section to the lter insertion jig and insert the
nozzle into the guide section.
Note
Pay attention to the direction of the nozzle lter opening section.
F4A39-6
(4) Fix the nozzle by holding it from the side with your nger so that the nozzle
is not inclined.
Nozzle
Press it
from the side.
F4A39-7
(5) Push the sliding section to the main machine acrylic block end face and
insert the nozzle lter.
Acrylic Block End Face
Sliding Section
Push
F4A39-8