4OM-1603-007_w.pdf - 第158页

4OM-1603 2-27 3. Machine Information : Chap.2 Machine Information Code Display Area A (The outline of the Machine Information) Display Area B (The details of the Machine Information) 80060a Alternated Feeder Feeder unloa…

100%1 / 379
4OM-1603
2-26
3. Machine Information : Chap.2
3.2 Machine Information List
Machine
Information Code
Display Area A (The outline of the Machine Information)
Display Area B (The details of the Machine Information)
800301 Warning: Decreasing of Comp. Hdlg. Rate(For Nozzle.)
Nozzle message rate :
-----
800302 Warning: Decreasing of Comp. Hdlg. Rate(For Nozzle.)
The rate of nozzle adsorption fell. A cycle stop is carried out.
-----
800401 Warning: Decreasing of Comp. Hdlg. Rate(For Fdr.)
Feeder message rate :
-----
800402 Warning: Decreasing of Comp. Hdlg. Rate(For Fdr.)
The rate of nozzle adsorption fell. A cycle stop is carried out.
-----
800505 Alternated Tray Magazine Axis
Shortage of component
-----
800601 Alternated Feeder
Shortage of component
-----
800602 Alternated Feeder
Splice waiting
-----
800603 Alternated Feeder
Comp. Vertical(sensor)
-----
800604 Alternated Feeder
Comp. Thickness(sensor)
-----
800605 Alternated Feeder
Comp. Missing(sensor)
-----
800606 Alternated Feeder
Comp. Recog. Error(recog.)
-----
800607 Alternated Feeder
Comp. Missing(recog.)
-----
800608 Alternated Feeder
Coplanarity Check Error
-----
800609 Alternated Feeder
The feeder at the alternation destination is invalid. Please set it effectively.
-----
1012-005
4OM-1603
2-27
3. Machine Information : Chap.2
Machine
Information Code
Display Area A (The outline of the Machine Information)
Display Area B (The details of the Machine Information)
80060a Alternated Feeder
Feeder unloading
-----
80060b Alternated Feeder
Returned to the priority feeder
-----
80060c Alternated Feeder
It was alternated.
-----
80060d Alternated Feeder
Feeder Alarm
-----
80060e Alternated Feeder
Alarm Code:A0 - Internal Parameter Error (Breakdown of Control P.C.B.)
-----
80060f Alternated Feeder
Alarm Code:A1 - Over Current Error (Foreign substances in the tape feeding drive
section)
-----
800610 Alternated Feeder
Alarm Code:A4 - Main Circuit Power Supply Error (Please check the power supply
voltage.) (G04)
-----
800611 Alternated Feeder
Alarm Code:A5 - Fault Speed Error (Tape catching)
-----
800612 Alternated Feeder
Alarm Code:A7 - Fault Load Error (Tape twisting, Catching foreign substances)
-----
800613 Alternated Feeder
Alarm Code:A8 - Encoder Error (Breaking wire, Breakdown of control P.C.B. and
Defective servo motor)
-----
800614 Alternated Feeder
Alarm Code:Ab - System Error
-----
800615 Alternated Feeder
Alarm Code:Ac - Reckless Run Detection Error
-----
800616 Alternated Feeder
Alarm Code:Ad - Excessive deviation in position
-----
800617 Alternated Feeder
Alarm Code:E0 - (1)Damaged cover tape/ (2)Cover tape jammed in the storage/ (3)
Splicing section peeling off
-----
1109-006
4OM-1603
2-28
3. Machine Information : Chap.2
1109-006
Machine
Information Code
Display Area A (The outline of the Machine Information)
Display Area B (The details of the Machine Information)
800618 Alternated Feeder
Alarm Code:E1 - Cover tape peeling off error (Get caught up)
-----
800619 Alternated Feeder
Alarm Code:E2 - Origin Position Checking Error (Excessively out of the origin
during servo ON)
-----
80061a Alternated Feeder
Alarm Code:E3 - (1)No supplied history/ (2)Dirty splicing detection sensor (dust
adhesion)
-----
80061b Alternated Feeder
Alarm Code:E4 - Positioning Completion Timeout (Foreign substances in the
sprocket wheel)
-----
80061c Alternated Feeder
Alarm Code:E5 - Redundant Order Error (A feeding error may occur.)
-----
80061d Alternated Feeder
Alarm Code:E6 - Lane Change Timeout Error
-----
80061e Alternated Feeder
Alarm Code:E7 - Servo ON Timeout
-----
80061f Alternated Feeder
Obverse/Reverse inspection detect (Sensor)
-----
800801 Start Auto Recovery Mode
Shortage of component
-----
800802 Start Auto Recovery Mode
Splice waiting
-----
800803 Start Auto Recovery Mode
Comp. Vertical(Sensor)
-----
800804 Start Auto Recovery Mode
Comp. Thickness(Sensor)
-----
800805 Start Auto Recovery Mode
Comp. Missing (Sensor)
-----
800806 Start Auto Recovery Mode
Comp. Recog. Error(recog.)
-----