4OM-1603-007_w.pdf - 第149页

4OM-1603 2-18 2. Management Information : Chap.2 1 109-006 Management Information Code Display Area A (The outline of the Management Information) Display Area B (The details of the Management Information) 050213 Conrmat…

100%1 / 379
4OM-1603
2-17
2. Management Information : Chap.2
1109-006
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
050205 ConrmationofP.C.B.existence
The operation mode of Lane A is set [STOP].
Please remove P.C.B. when not transferred.
050206 ConrmationofP.C.B.existence
The operation mode of Lane B is set [STOP].
Please remove P.C.B. when not transferred.
050207 ConrmationofP.C.B.existence
There is a possibility that there are 2 sheets of PCB on the input conveyor. Please
remove PCB from Deceleration Sensor, or move it to Stop sensor, or delete the
PCB memory information.
050208 ConrmationofP.C.B.existence
There is a possibility that there are 2 sheets of PCB on the input conveyor in Lane
A. Please remove PCB from Deceleration Sensor, or move it to Stop sensor, or
delete the PCB memory information.
050209 ConrmationofP.C.B.existence
There is a possibility that there are 2 sheets of PCB on the output conveyor in
Lane B. Please remove PCB from Deceleration Sensor, or move it to Stop sensor,
or delete the PCB memory information.
05020a ConrmationofP.C.B.existence
There is a possibility that there are 2 sheets of PCB on the shuttle conveyor in
input side. Please remove PCB from Deceleration Sensor, or move it to Stop
sensor, or delete the PCB memory information.
05020b ConrmationofP.C.B.existence
There is a possibility that there are 2 sheets of PCB on the shuttle conveyor in
output side. Please remove PCB from Deceleration Sensor, or move it to Stop
sensor, or delete the PCB memory information.
05020c ConrmationofP.C.B.existence
There is PCB on the input sensor of Lane A.
Please return PCB to the input conveyor and run it.
05020d ConrmationofP.C.B.existence
There is PCB on the input sensor of Lane B.
Please return PCB to the input conveyor and run it.
05020e ConrmationofP.C.B.existence
There is PCB on the input sensor.
Please return PCB to the input conveyor and run it.
05020f ConrmationofP.C.B.existence
There is no PCB in the machine. Please position a PCB.
050210 ConrmationofP.C.B.existence
Please put PCB on the positioning conveyor, and start it.
050211 ConrmationofP.C.B.existence
Please remove PCB from input position.
Cutout PCB cannot be transferred from input position.
050212 ConrmationofP.C.B.existence
Please remove the substrate at the upstream position.
The substrate for weight to exceed 2.5kg cannot be transported simultaneously.
4OM-1603
2-18
2. Management Information : Chap.2
1109-006
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
050213 ConrmationofP.C.B.existence
Please remove the substrate at A lane upstream position.
The substrate for weight to exceed 2.5kg cannot be transported simultaneously.
050214 ConrmationofP.C.B.existence
Please remove the substrate at B lane upstream position.
The substrate for weight to exceed 2.5kg cannot be transported simultaneously.
050301 ConrmationofFirmwareversion
Firmware of transfer driver is not the latest version. Please update it.
050401 Manual transfer
P.C.B. (X>260mm) which is set by PP data is unable to take Input Position.
050402 Manual transfer
Please operate after removing P.C.B. from output conveyor. There is a possibility
of pushing and rising with Stopper.
050403 Manual transfer
It is impossible to take from Sensor Detection of Input Position.
Please put P.C.B. on Input Conveyor, or move it to Output position in Recovery
Menu.
050404 Manual transfer
PCB (X>260mm) which is set by PP data is unable to be taken in Input Conveyor.
050405 Manual transfer
There is PCB on Deceleration Sensor of Input Conveyor. There is a possibility that
PCB is inserted.
050406 Manual transfer
There is PCB on Deceleration Sensor of Shuttle Conveyor in Output side. There
is a possibility that PCB is inserted.
050407 Manual transfer
Lane A is not able to be set in Current Program. Please change Current Program
or change to Lane B.
050408 Manual transfer
Lane B is not able to be set in Current Program. Please change Current Program
or change to Lane A.
050409 Manual transfer
PCB Y size and Conveyor Width in Current Program are not equal. Please change
Current Program.
05040a Manual transfer
Cutout PCB cannot be taken in input position.
05040b Manual transfer
Please remove PCB from input position.
Cutout PCB cannot be transferred from input position.
05040c Manual transfer
Itisnotpossibletotransportittothespeciedposition.
05040d Manual transfer
It is not possible to operate because it interferes in the adsorption treatment
device.
05040e Manual transfer
It composes the device, and it is not possible to operate.
4OM-1603
2-19
2. Management Information : Chap.2
1109-006
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
050501 Convert Width Setup
Please set conveyor width 49.5~461.5mm.
The total of PCB size/offset/clearance is over movable range.
050502 Convert Width Setup
Please set conveyor width 49.5~382.5mm.
The total of PCB size/offset/clearance is over movable range.
050503 Convert Width Setup
Movable Range for the destination of W1 is set.
Please check P.C.B. size/offset/clearance of Lane A.
050504 Convert Width Setup
Movable Range for the destination of W1 is set.
Please check P.C.B. size/offset/clearance of Lane A.
050505 Convert Width Setup
Movable Range for the destination of W2 is set.
Please check P.C.B. size/offset/clearance of Lane A
050506 Convert Width Setup
Movable Range for the destination of W2 is set.
Please check P.C.B. size/offset/clearance of Lane A.
050507 Convert Width Setup
Movable Range for the destination of W3 is set.
Please check P.C.B. size/offset/clearance of Lane B.
050508 Convert Width Setup
Movable Range for the destination of W3 is set.
Please check P.C.B. size/offset/clearance of Lane B.
050509 Convert Width Setup
These is a possibility of the interference with W1 and W2.
Please check P.C.B. size/offset/clearance of Lane A.
05050a Convert Width Setup
There is a possibility of the interference with W2 and W3. Please Check P.C.B.
size/offset/clearance of Lane A/B.
05050b Convert Width Setup
There is an interference between object position of Conveyor and Support Pin.
Please exchange Support Pin.
050510 Convert Width Setup
ZeroingofW1axisisnotnished.PleaseperformzeroingofW1axis.
050511 Convert Width Setup
ZeroingofW2axisisnotnished.PleaseperformzeroingofW2axis.
050512 Convert Width Setup
ZeroingofW3axisisnotnished.PleaseperformzeroingofW3axis.
050513 Convert Width Setup
The set value of W1 axis exceeds the soft limit.
Please determine the value within the range from 300.5mm to 468.5mm.
050514 Convert Width Setup
The set value of W1 axis exceeds the soft limit.
Please determine the value within the range from 368.5mm to 536.5mm.