4OM-1603-007_w.pdf - 第141页

4OM-1603 2-10 2. Management Information : Chap.2 Management Information Code Display Area A (The outline of the Management Information) Display Area B (The details of the Management Information) 017203 Nozzle set-up (Blo…

100%1 / 379
4OM-1603
2-9
2. Management Information : Chap.2
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
015015 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head1).
Please set type "FA04" nozzle in the stocker position where nozzle can change.
015016 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head2).
Please set type "FA04" nozzle in the stocker position where nozzle can change.
015017 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head1).Pleasesettype"BF02"or"HA09"
nozzle in the stocker position where nozzle can change.
015018 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head2).Pleasesettype"BF02"or"HA09"
nozzle in the stocker position where nozzle can change.
015101 Nozzle location teaching, check the position of nozzle on head
No found nozzle (Head1). Or, the different Nozzle could be arranged.
015102 Nozzle location teaching, check on the position of nozzle on head
No found nozzle (Head2). Or, the different Nozzle could be arranged.
015201 Teaching check the conveyor
No P.C.B. on Conveyor. Please put P.C.B. in.
015202 Teaching check the conveyor
Please set P.C.B. positioning. Please set it again after cancel positioning if P.C.B.
positioning is already done.
015203 Teaching check the conveyor
Please push Conveyor Width Moving.
015301 ODD Head Nozzle stocker check
There does not exist stocker that can replace nozzle (Block1).
015302 ODD Head Nozzle stocker check
There does not exist stocker that can replace nozzle (Block2).
016001 Tray teaching
Traverse of Tray is not drawn out (Block1). Draw out Traverse.
016002 Tray teaching
Tray Traverse is not drawn out (Block2). Draw out Traverse.
016101 Coplanarity Teaching
"Coplanarity Detection" of Test Operation Mode is set "No". Execute it after
cancelling Test Operation Mode.
016201 Coplanarity Test
Please pickup part.
017009 Teaching Check on the position of Glass jig
Not found Glass Jig for Teaching. Please check that Glass Jig is set in its position.
017201 Nozzle set-up (Block1)
Nozzle Placement/Store mode of Stocker(Block2) is not possible to operate.
Please specify Stocker(Block1).
017202 Nozzle set-up (Block1)
High nozzle cannot be stored while Odd nozzle is placed. Please restart after
returning all Odd Nozzle.
1109-006
4OM-1603
2-10
2. Management Information : Chap.2
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
017203 Nozzle set-up (Block1)
High nozzle cannot be stored while Odd nozzle is placed. Please restart after
returning all Odd Nozzle.
017204 Nozzle set-up (Block1)
Because of interference with Nozzle which is already placed, it cannot be placed.
Do not place Nozzle in the front and rear of two Odd nozzle placed.
017205 Nozzle set-up (Block1)
Placement/Storeisimpossibleinthepositionforthespeciedstocker.
017206 Nozzle set-up (Block1)
It is impossible to place it because of interfering in the placed nozzle. Please do
not place a nozzle before or after placing ODD nozzle.
017301 Nozzle set-up (Block2)
Nozzle Placement/Store mode of Stocker(Block1) is not possible. Please set
Stocker (Block2).
017302 Nozzle set-up (Block2)
High nozzle cannot be stored while Odd nozzle is placed. Please restart after
returning all Odd Nozzle.
017303 Nozzle set-up (Block2)
High nozzle cannot be stored while Odd nozzle is placed. Please restart after
returning all Odd Nozzle.
017304 Nozzle set-up (Block2)
Because of interference with Nozzle which is already placed, it cannot be placed.
Do not place Nozzle in the front and rear of two Odd nozzle placed.
017305 Nozzle set-up (Block2)
Placement/Storeisimpossibleinthepositionforthespeciedstocker.
017306 Nozzle set-up (Block2)
It is impossible to place it because of interfering in the placed nozzle. Please do
not place a nozzle before or after placing ODD nozzle.
017401 Button for inserting power
Can not supply power while Line Sensor program is on writing. Operate it after
writing completely.
017501 Operationmodesetconrmation
"Feeder Connection" or "Feeder Serial Communication" of Test Operation Mode is
set. Execute it after reset Operation Mode.
017601 Inching movement
Perform zeroing.
017602 Inching movement
Please push the Feeder Base Ready SW
017603 Inching movement
Close the safety door of multi-tray, and press the Ready button.
017604 Inching movement
The range is out of movable Range.
017605 Inching movement
HL-axis is fallen. There is a possibility of collision between Noz and axis.
Please perform zeroing of HL-axis or move it to origin position.
1109-006
4OM-1603
2-11
2. Management Information : Chap.2
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
017606 Inching movement
L1-axis is fallen. There is a possibility of collision between Noz and axis.
Please perform zeroing of L1-axis or move it to origin position.
017607 Inching movement
L2-axis is fallen. There is a possibility of collision between Noz and axis.
Please perform zeroing of L2-axis or move it to origin position.
017608 Inching movement
L3-axis is fallen. There is a possibility of collision between Noz and axis.
Please perform zeroing of L3-axis or move it to origin position.
017701 Zeroing (set axis)
Push Ready SW of Feeder Base.
017702 Zeroing (set axis)
Close the safety door of multi-tray, and press the Ready button.
018001 Recycling Conveyor (Block1)
RecycleConveyor(Block1)islledup.
018002 Recycling Conveyor (Block1)
The connection of Recycling Conveyor (Block1) differs from Cmpnt Arranging
Data. Or, it has multi-connection.
018003 Recycling Conveyor (Block1)
Recycling Conveyor (Block1) is on ready.
Please change to Auto Opn Mode after it is done.
018101 Recycling Conveyor (Block2)
RecyclingConveyor(Block2)islledup.
018102 Recycling Conveyor (Block2)
The connection of Recycling Conveyor(Block2) differs from Cmpnt Arranging
Data. Or, it has multi-connection.
018103 Recycling Conveyor (Block2)
Recycling Conveyor (Block2) is on Ready. Please change to Auto Opn Mode after
it is done.
018201 Multi-tray (Block1)
Close the safety door of multi-tray, and press a button [READY] of it. When multi-
tray [READY] does not change to [ON], press the button [READY] of Feeder.
018202 Multi-tray (Block1)
Pallet of multi-tray is drawn out. Execute zeroing all, and store the pallet.
018203 Multi-tray (Block1)
Multi-tray breaking out was detected. Execute zeroing all, and store the pallet.
018204 Multi-tray (Block1)
Press [READY] button of Feeder base, and supply the power of multi-tray.
018205 Multi-tray (Block1)
Close the safety door(Center) of multi-tray, and press [READY] button.
018206 Multi-tray (Block1)
Close the safety door(Lower) of multi-tray, and press [READY] button.
018207 Multi-tray (Block1)
Close the safety door(Upper) of multi-tray, and press [READY] button.
018208 Multi-tray (Block1)
ZeroingofTraverse-axisisnotnished.Performzeroingofmulti-tray.
1109-006