4OM-1603-007_w.pdf - 第108页

4OM-1603 1-53 4. Maintenance Method : Chap.1 4. Maintenance Method Periodically clean the vacuum nozzles to maintain reliable and stable component picks and placement. • It is advisable that the nozzles be cleaned at le…

4OM-1603

1-52

3. Maintenance Spots : Chap.1

3.2.13 Fans Section

Every 3 Months Cleaning

Required Time: 10 minutes

Suck dirt and dust from the dust filters with

a vacuum cleaner.

Ventilating Fan (3 locations)

F4A38

Fan

Every 3 Months Cleaning

Required Time: 10 minutes

Air-Intake Fan (Filter)

Remove the screws (3 locations) fixing the fan

guard and remove the fan guard. Then, clean any

debris or dust in the filter using the vacuum

cleaner.

F4A39

1007-004

4OM-1603

1-53

4. Maintenance Method : Chap.1

4. Maintenance Method

Periodically clean the vacuum nozzles to maintain reliable and stable component

picks and placement.

•

It is advisable that the nozzles be cleaned at least once a week.

Note

The nozzle for 0402 recommends the cleaning every 3 or 4 days.

•

Change cleaning frequency according to various frequency of use and

accumulation of debris along with certain environmental conditions.

•

When the vacuum suction force weakens or a nozzle constantly fails to pick or

place components, it is required to check the nozzle for debris and cleanliness.

Do not grasp this part strongly during the

nozzle cleaning.

Otherwise, the nozzle may be damaged.

When it is necessary to hold the nozzle firmly,

try to grasp the collar portion.

When a recognition error occurs frequently,

rub the back of the collar approximately

20 times with a toothbrush.

F4A39-1

1202-002

4OM-1603

1-54

4. Maintenance Method : Chap.1

4.1 Cleaning Method of Vacuum Nozzles

Remove Nozzle Filter

Refer to "4.3 Nozzle Filter Removal Procedure"

for details.

Blow air Vacuum Nozzle

Confirm that there is no clog in pick-up hole

Refer to "4.4 Method of Blow air" for details.

Confirm the clog in the top of pick-up hole by

the magnifying glass.

Refer to "4.5 Cleaning of high-speed nozzle

hole part with pin gauge" for details.

Remove Vacuum Nozzle

Refer to "4.2 Method of detaching vacuum

nozzle" for details.

Insert the nozzle filter

Refer to "4.6 Nozzle Filter Insertion Procedure"

for details.

Reference

F4A39-1a

1202-001