4OM-1603-007_w.pdf - 第26页
Safety Precautions Safe-15 1OM-1603 1 108-004 5. Alert Labels 5. Alert Labels The alert labels (described below) are used for this machine. Please read the instructions on each label carefully and check the contents, obs…
Safety Precautions
Safe-14
1OM-1603
Alert Indications described as "
CAUTION
" (continued)
Alert Description Related Items
The padlock key should be kept in such a way that nobody except the
personnel in charge of maintenance can supervise it.
"4.3" in
"Chapter 2 (Vol. 1)"
The load power to the motors, etc., is turned OFF but the setup
operation must be performed carefully when you put your hand
insidethemachine.Avoidhandandngerinjuries.
"2.3.5" in
"Chapter 3 (Vol. 1)"
"4.1" and "4.2.1" in
"Chapter 6 (Vol. 2)"
Even when the power breaker is set to "OFF", the primary line is
powered, making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before
maintenance work.
"1.1" in
"Chapter 1 (Vol. 4)"
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
the DC power supply and the servo amplier go "OFF" in 10 minutes
or more after the power breaker is set to "OFF".
"1.1" in
"Chapter 1 (Vol. 4)"
Whentheatringiscut,takecarenottogetinjuredbythe
commercially available cutter.
"3.2.6" in
"Chapter 1 (Vol. 4)"
1108-006
4. Alert Indications in Instruction Manual
Safety Precautions
Safe-15
1OM-1603
1108-004
5. Alert Labels
5. Alert Labels
The alert labels (described below) are used for this machine.
Please read the instructions on each label carefully and check the contents, observing the
actual object.
Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, contact the marketing department or
sales agency of Hitachi High-Technologies for the replacement with a new one.
Safety Precautions
Safe-16
1OM-1603
1108-005
5. Alert Labels
Location of Alert Labels
The alert labels are afxed on dangerous and caution-required areas.
Refer to "Alert Labels and Description" for details.
(23)
3
F1X1