4OM-1603-007_w.pdf - 第170页
4OM-1603 2-39 3. Machine Information : Chap.2 Machine Information Code Display Area A (The outline of the Machine Information) Display Area B (The details of the Machine Information) 08f902 Nozzle auto. Replace Pick-up r…
4OM-1603
2-38
3. Machine Information : Chap.2
Machine
Information Code
Display Area A (The outline of the Machine Information)
Display Area B (The details of the Machine Information)
80f402 FF func. for Print Pos Correction
Standard PCB Mounting will be executed without Print Pos. Correction because
Global Recognition of PP Data does not have 2 points.
-----
80f403 FF func. for Print Pos Correction
Standard PCB Mounting will be executed without Print Pos. Correction because
Unit PCB Recog or Local PCB Recog of PP Data is being used.
-----
80f404 FF func. for Print Pos Correction
Standard PCB Mounting will be executed without Print Pos. Correction because
could not receive Print Pos. Correction values normally.
-----
80f405 FF func. for Print Pos Correction
Standard PCB Mounting will be executed without Print Pos. Correction because
of time-out of receiving Print Pos. Correction values.
-----
80f501 Auto Cover Locked Start
After Auto Cover locked, it is stopped because NG Items are found by Free Check
beforeproductopreation.Pleaseconrmtheguideforstart-up.
-----
80f601 Feeder Base
Connector for Feeder Cart is not connected.
-----
80f602 Feeder Base
Not turned Feeder Cart on yet.
-----
80f603 Feeder Base
Communicating with Feeder.
-----
08f701 Library Tape feeding High-speed
It is necessary to take out and in a feeder if tape high-speed feeding is set
enable.
-----
08f801 Unit PCB recognition data transfer func.
There is a possibility that the operation changed to PCB recog. manual alignment
during data processing, or PCB which is being data processing is taken off.
Please change the same current program in the head mounter(Unit 1). Or, set unit
PCB recog. data communication of operation mode [Disable] for a moment, and
then set [Enable] in the head mounter(Unit 1).
-----
08f901 Nozzle auto. Replace
Nozzle is replaced automatically because of a lowering of pick-up rate.
-----
1109-001
4OM-1603
2-39
3. Machine Information : Chap.2
Machine
Information Code
Display Area A (The outline of the Machine Information)
Display Area B (The details of the Machine Information)
08f902 Nozzle auto. Replace
Pick-up rate of nozzle went down, and nozzle was replaced automatically. But
nozzle position teaching failed.
-----
08f903 Nozzle auto. Replace
Pick-up rate of nozzle went down, but it is interrupted to replace nozzle
automatically.
-----
08f904 Nozzle auto. Replace
Pick-up rate of nozzle went down. It planned to replace nozzle automatically, but
there was no place to store it.
-----
08f905 Nozzle auto. Replace
Pick-up rate of nozzle went down. It planned to replace nozzle automatically, but
there was no spare nozzle.
-----
08f906 Nozzle auto. Replace
Nozzle is replaced automatically because of a lowering of pick-up rate. There is
not spare nozzle anymore.
-----
08fa01 Automatic correction of missed standard mark
Standard mark position offset is automatically corrected.
-----
T4B2
1109-001
4OM-1603
2-40
4. "Error" Window : Chap.2
4. "Error" Window
When the machine detects an error, the following error window appears.
[7]
[8] [9] [10]
[1] [2]
[3]
[6]
[4]
[5]
Example of Error Window F4B4
[1] Error ID
The error type is displayed using a 6-digit gure.
Reference
When an error has occurred, use this ID as an index and refer to "Chapter
3 Troubleshooting based Error ID" for details.
[2] Recognition Error ID
In this text box, the error type is displayed using an 8-digit gure.
[3] Error Name
In this text box, the error category is displayed.
[4] Description
In this text box, the error description is displayed.
[5] Remedy
In this text box, the error name, description, cause and remedial procedure
are described.
1012-005