4OM-1603-007_w.pdf - 第333页

4OM-1603 3-158 3. Error IDs and Remedial Procedures : Chap.3 Error ID Error Name, Description, Cause, and Remedy 604610 T eaching Height of Glass Jig Flange of Nozzle is not detected within the predetermine range.(E/NR) …

100%1 / 379
4OM-1603
3-157
3. Error IDs and Remedial Procedures : Chap.3
Error ID Error Name, Description, Cause, and Remedy
604601 Teaching Height of Glass Jig
Error is detected before starting Detection on Linear Measure Sensor.(There is a
possibility that Linear measure sensor is broken, or Odd Noz is placed.)
-----
604602 Teaching Height of Glass Jig
Time-out of [OFF] signal of Linear measure sensor
-----
604603 Teaching Height of Glass Jig
Error in DD-axis
-----
604604 Teaching Height of Glass Jig
Error in NS-axis
-----
604605 Teaching Height of Glass Jig
Error in DD/NS-axis
-----
604606 Teaching Height of Glass Jig
Time-out of DD/NS-axis
-----
604607 Teaching Height of Glass Jig
Error in calculating drive wave of HL-axis
-----
604608 Teaching Height of Glass Jig
Error in calculating drive wave of NL-axis
-----
604609 Teaching Height of Glass Jig
Time-out of starting HL/NL-axis movement
-----
60460a Teaching Height of Glass Jig
Time-out of starting HL-axis movement
-----
60460b Teaching Height of Glass Jig
Time-out of starting NL-axis movement
-----
60460c Teaching Height of Glass Jig
Time-outofnishingHL/NL-axismovement
-----
60460d Teaching Height of Glass Jig
Failed in measuring real time of linear measure sensor.
-----
60460e Teaching Height of Glass Jig
Error in measuring Linear measure sensor
-----
60460f Teaching Height of Glass Jig
Flange of Nozzle is not detected within the predetermine range.(Not E/NR)
Please remeasure the height teach after teaching the head rotation on the angle
axis.
1109-006
4OM-1603
3-158
3. Error IDs and Remedial Procedures : Chap.3
Error ID Error Name, Description, Cause, and Remedy
604610 Teaching Height of Glass Jig
Flange of Nozzle is not detected within the predetermine range.(E/NR)
Please remeasure the height teach after teaching the head rotation on the angle
axis.
604611 Teaching Height of Glass Jig
The height of Flange of Nozzle is not changed.(Nozzle pressed is not detected.)
-----
604612 Teaching Height of Glass Jig
Program Error
-----
604613 Teaching Height of Glass Jig
Offset is 1mm less than the set value.
-----
604614 Teaching Height of Glass Jig
Offset is 1mm more than the set value.
-----
604615 Teaching Height of Glass Jig
The value of Flowmeter is higher than 5.0V.
-----
604616 Teaching Height of Glass Jig
The value of Flowmeter is lower than 4.7V.
-----
604617 Teaching Height of Glass Jig
ThereisnomeasureddataofNoz1.ItisnecessarytomeasureNoz1rst.
-----
604618 Teaching Height of Glass Jig
CannotmeasureitforXY-coordisnotdened.
-----
604619 Teaching Height of Glass Jig
Error in Flowing Quantity
-----
604701 Teaching Height of Traverse Chute
Error is detected before starting Detection on Linear Measure Sensor.(There is a
possibility that Linear measure sensor is broken, or Odd Noz is placed.)
-----
604702 Teaching Height of Traverse Chute
Time-out of [OFF] signal of Linear measure sensor
-----
604703 Teaching Height of Traverse Chute
Error in DD-axis
-----
604704 Teaching Height of Traverse Chute
Error in NS-axis
-----
604705 Teaching Height of Traverse Chute
Error in DD/NS-axis
-----
1109-006
4OM-1603
3-159
3. Error IDs and Remedial Procedures : Chap.3
Error ID Error Name, Description, Cause, and Remedy
604706 Teaching Height of Traverse Chute
Time-out of DD/NS-axis
-----
604707 Teaching Height of Traverse Chute
Error in calculating drive wave of HL-axis
-----
604708 Teaching Height of Traverse Chute
Error in calculating drive wave of NL-axis
-----
604709 Teaching Height of Traverse Chute
Time-out of starting HL/NL-axis movement
-----
60470a Teaching Height of Traverse Chute
Time-out of starting HL-axis movement
------
60470b Teaching Height of Traverse Chute
Time-out of starting NL-axis movement
------
60470c Teaching Height of Traverse Chute
Time-outofnishingHL/NL-axismovement
------
60470d Teaching Height of Traverse Chute
Failed in measuring real time of linear measure sensor.
------
60470e Teaching Height of Traverse Chute
Error in measuring Linear measure sensor
------
60470f Teaching Height of Traverse Chute
Flange of Nozzle is not detected within the predetermine range.(Not E/NR)
Please remeasure the height teach after teaching the head rotation on the angle
axis.
604710 Teaching Height of Traverse Chute
Flange of Nozzle is not detected within the predetermine range.(E/NR)
Please remeasure the height teach after teaching the head rotation on the angle
axis.
604711 Teaching Height of Traverse Chute
The height of Flange of Nozzle is not changed.(Nozzle pressed is not detected.)
------
604712 Teaching Height of Traverse Chute
Program Error
------
604713 Teaching Height of Traverse Chute
Offset is 1mm less than the set value.
------
604714 Teaching Height of Traverse Chute
Offset is 1mm more than the set value.
------
1109-006