4OM-1603-007_w.pdf - 第38页
Safety Precautions Safe-27 1OM-1603 1 108-003 5. Alert Labels No. Alert Labels and Description (7) Description When a cover (T ransparent Cover) is opened or closed, be sure to hold the grip rmly and slowly move the c…
Safety Precautions
Safe-26
1OM-1603
1108-005
5. Alert Labels
No. Alert Labels and Description
(4)
Description
Only well-trained service personnel shall replace the cutter blades. Otherwise, a
hand injury, etc., will result.
(5)
Description
This label indicates that high voltage is applied to the area. Residual voltages may
remain behind for a few minutes in the internal devices of the machine after power
interception.
Before performing maintenance work, wait until the charge lamps of the DC power
supply and the servo amplier go "OFF" in 10 minutes or more after the power
breaker is set to "OFF".
(6)
Description
Before connecting to the breaker's primary power leading-in section, connect the
grounding cable (PE).
Imperfect grounding will cause an electric shock.
Safety Precautions
Safe-27
1OM-1603
1108-003
5. Alert Labels
No. Alert Labels and Description
(7)
Description
When a cover (Transparent Cover) is opened or closed, be sure to hold the grip
rmly and slowly move the cover up or down. Otherwise, your hand and ngers
might get caught in the door and get injured.
(8)
Description
Before maintenance work, shut off the power breaker and lock it with the padlock.
Even when the power breaker is set to "OFF", the primary line is powered, making
it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance
work.
(9)
Description
Do not drop a head. Otherwise, a foot injury will result or the head itself may be
damaged.
Carefully handle each head one by one and do not drop any.
Safety Precautions
Safe-28
1OM-1603
1108-003
5. Alert Labels
No. Alert Labels and Description
(10)
CAUTION
Your hand might be caught in the moving section. Do not
put your hand into the cover opening during the machine
operation.
Pay attention to the moving
mechanisms!
10-0249-
Description
Do not put your hand inside the machine while the machine is running.
Otherwise, your hand may be trapped in the moving mechanisms, causing injury.
(11)
Description
Do not put your hand in the moving area while the feeder base is moving up or
down.
While the LED of a [FEEDER READY] switch is ickering, it indicates that the
feeder base is moving upward or downward.
(12)
Description
Strong permanent magnets are used in the moving sections of the X/Y beam.
•
Do not bring any metal of high magnetizability close to this. Otherwise, such
metal will easily be magnetized and attracted, causing an injury to the operator
or breakdown of the machine.
•
Do not bring any object such as a magnetic card or a watch close to the
magnets.Such an object can easily be affected by the magnetism. Otherwise, the
data of the magnetic car might be cleared or a watch, etc., may be damaged due
to the strong magnetism.