4OM-1603-007_w.pdf - 第66页
4OM-1603 1-1 1 2. Maintenance Check List : Chap.1 2. Maintenance Check List The periodic maintenance items (inspection, cleaning, lubrication, etc.) are classied and described based on how frequently each item should be…
4OM-1603
1-10
1. Outline of Maintenance : Chap.1
Device Name
Inspection Cleaning,
and Lubricating Spots
Work
Maintenance Cycle
Daily Weekly Monthly
Every
3 Months
Every
6 Months
Yearly
3.2.8 X/Y Beam Section
X-Axis Linear Guide
Inspection
○
X-Axis Linear Guide
Cleaning,
Lubrication
*
○
Y-Axis Linear Guide
Inspection
○
Y-Axis Linear Guide
Cleaning,
Lubrication
*
○
X-Axis Cable Side Face
Cleaning,
Lubrication
○
X-Axis Cable Fixing
Places
Inspection
○
X-Axis Linear Scale
Cleaning
○
Y-Axis Cable Side Face
Cleaning,
Lubrication
○
Y-Axis Cable Fixing
Places
Inspection
○
Y-Axis Linear Scale
Cleaning
○
3.2.9 PCB Positioning
Section
Upper Surface of Backup
Table
Cleaning
○
Ball Screw
Cleaning,
Lubrication
*
○
Ball Screw Splines
Cleaning,
Lubrication
○
3.2.10 Conveyor Section
Linear Guide
Cleaning,
Lubrication
*
○
Support Pin Detection
Sensors
Cleaning,
Lubrication
○
PCB Detection Sensor
Cleaning
○
PCB Detection Sensor
Fiber
Cleaning
○
PCB Detection Sensor
Mirror
Cleaning
○
3.2.11 Nozzle Stocker
Section
Nozzle Storage Section
Cleaning
○
Nozzle Stocker Sliding
Area
Cleaning,
Lubrication
○
Shutter Flange Pin Sliding
Section
Cleaning,
Lubrication
○
3.2.12 Control Box
Section
Filter
Cleaning
○
3.2.13 Fans
Ventilating Fan
Cleaning
○
Air-Intake Fan
Cleaning
○
T4A8
1012-004
4OM-1603
1-11
2. Maintenance Check List : Chap.1
2. Maintenance Check List
The periodic maintenance items (inspection, cleaning, lubrication, etc.) are
classied and described based on how frequently each item should be performed.
Use the tables below as check lists.
Reference
Refer to "3. Maintenance Spots" in "Chapter 1" for the spots to be maintained.
2.1 Daily Maintenance
Object Unit
Inspection, Cleaning,
and Lubricating Spots
Work Grease Required Tools Check
3.2.1 Air Source
Z Clamp Pressure
Inspection
----- -----
Air Blowing Pressure
Inspection
----- -----
Main Air Pressure
Inspection
----- -----
3.2.2 Vacuum System
Vacuum Pressure
Inspection
----- -----
3.2.3 Component
Recognition
Camera Section
Component Recognition
Camera
Cleaning
----- Vacuum Tweezers,
Lens Cleaning Cloth
Component Storage Box
Cleaning
----- -----
Hanenaito
Cleaning
----- Vacuum Cleaner
3.2.5 Feeder Cart
Section
Upper Surface of Feeder
Base
Cleaning
----- Vacuum Cleaner, Rag
Scrap Box
Cleaning
----- -----
Reel Box
Cleaning
----- Vacuum Cleaner, Rag
3.2.7 Head Section
High Speed
Head
Linear Measure Sensor
(Light Emitter and
Receiver)
Cleaning
----- Absolute Ethanol,
Cotton Swab
3.2.8 X/Y Beam
Section
X-Axis Linear Guide
Inspection
----- -----
Y-Axis Linear Guide
Inspection
----- -----
T4A9
1109-004
4OM-1603
1-12
2. Maintenance Check List : Chap.1
2.2 Weekly Maintenance
Object Unit
Inspection, Cleaning,
and Lubricating Spots
Work Grease Required Tools Check
3.2.1 Air Source
Drain
Cleaning
----- -----
3.2.3 Component
Recognition
Camera Section
Fiducial Mark
Cleaning
----- Lens Cleaning Cloth
3.2.5 Feeder Cart
Section
Groove on Feeder Base
Cleaning
----- Vacuum Cleaner
3.2.6 Feeder Cart
Section (Cutter)
Cutter Box Inside
Cleaning
----- Vacuum Cleaner
Linear Guide
3.2.7 Head Section
Vacuum Nozzle
Cleaning
----- Lens Cleaning Cloth,
Air Gun, Rag
Nozzle Filter
Change
----- Filter Insertion Jig
(High-Speed Nozzle),
Filter Insertion Jig
(Nozzle for Middle-Size and
Odd-Shape Components),
Filter Removing Jig
3.2.9 PCB Positioning
Section
Upper Surface of Feeder
Base
Cleaning
----- Vacuum Cleaner
3.2.10 Conveyor
Section
Support Pin Detection
Sensors
Cleaning
----- Rag
PCB Detection Sensor,
PCB Detection Sensor
Fiber,
PCB Detection Sensor
Mirror
Cleaning
----- Rag
T4A10
1109-005