4OM-1603-007_w.pdf - 第159页

4OM-1603 2-28 3. Machine Information : Chap.2 1 109-006 Machine Information Code Display Area A (The outline of the Machine Information) Display Area B (The details of the Machine Information) 800618 Alternated Feeder Al…

100%1 / 379
4OM-1603
2-27
3. Machine Information : Chap.2
Machine
Information Code
Display Area A (The outline of the Machine Information)
Display Area B (The details of the Machine Information)
80060a Alternated Feeder
Feeder unloading
-----
80060b Alternated Feeder
Returned to the priority feeder
-----
80060c Alternated Feeder
It was alternated.
-----
80060d Alternated Feeder
Feeder Alarm
-----
80060e Alternated Feeder
Alarm Code:A0 - Internal Parameter Error (Breakdown of Control P.C.B.)
-----
80060f Alternated Feeder
Alarm Code:A1 - Over Current Error (Foreign substances in the tape feeding drive
section)
-----
800610 Alternated Feeder
Alarm Code:A4 - Main Circuit Power Supply Error (Please check the power supply
voltage.) (G04)
-----
800611 Alternated Feeder
Alarm Code:A5 - Fault Speed Error (Tape catching)
-----
800612 Alternated Feeder
Alarm Code:A7 - Fault Load Error (Tape twisting, Catching foreign substances)
-----
800613 Alternated Feeder
Alarm Code:A8 - Encoder Error (Breaking wire, Breakdown of control P.C.B. and
Defective servo motor)
-----
800614 Alternated Feeder
Alarm Code:Ab - System Error
-----
800615 Alternated Feeder
Alarm Code:Ac - Reckless Run Detection Error
-----
800616 Alternated Feeder
Alarm Code:Ad - Excessive deviation in position
-----
800617 Alternated Feeder
Alarm Code:E0 - (1)Damaged cover tape/ (2)Cover tape jammed in the storage/ (3)
Splicing section peeling off
-----
1109-006
4OM-1603
2-28
3. Machine Information : Chap.2
1109-006
Machine
Information Code
Display Area A (The outline of the Machine Information)
Display Area B (The details of the Machine Information)
800618 Alternated Feeder
Alarm Code:E1 - Cover tape peeling off error (Get caught up)
-----
800619 Alternated Feeder
Alarm Code:E2 - Origin Position Checking Error (Excessively out of the origin
during servo ON)
-----
80061a Alternated Feeder
Alarm Code:E3 - (1)No supplied history/ (2)Dirty splicing detection sensor (dust
adhesion)
-----
80061b Alternated Feeder
Alarm Code:E4 - Positioning Completion Timeout (Foreign substances in the
sprocket wheel)
-----
80061c Alternated Feeder
Alarm Code:E5 - Redundant Order Error (A feeding error may occur.)
-----
80061d Alternated Feeder
Alarm Code:E6 - Lane Change Timeout Error
-----
80061e Alternated Feeder
Alarm Code:E7 - Servo ON Timeout
-----
80061f Alternated Feeder
Obverse/Reverse inspection detect (Sensor)
-----
800801 Start Auto Recovery Mode
Shortage of component
-----
800802 Start Auto Recovery Mode
Splice waiting
-----
800803 Start Auto Recovery Mode
Comp. Vertical(Sensor)
-----
800804 Start Auto Recovery Mode
Comp. Thickness(Sensor)
-----
800805 Start Auto Recovery Mode
Comp. Missing (Sensor)
-----
800806 Start Auto Recovery Mode
Comp. Recog. Error(recog.)
-----
4OM-1603
2-29
3. Machine Information : Chap.2
Machine
Information Code
Display Area A (The outline of the Machine Information)
Display Area B (The details of the Machine Information)
800807 Start Auto Recovery Mode
Comp. Missing (Recog)
-----
800808 Start Auto Recovery Mode
Coplanarity Check Error
-----
800809 Start Auto Recovery Mode
Feeder Alarm
-----
80080a Start Auto Recovery Mode
Feeder unloading
-----
80080b Start Auto Recovery Mode
Device Op is stopped because Feeder is not loaded.
-----
80080c Start Auto Recovery Mode
Etc
-----
80080d Start Auto Recovery Mode
Obverse/Reverse inspection error(Sensor)
-----
800902 Alarm for Shortage of Comp.
Few components to feed.
-----
801101 Nozzlediameterconrmation
The disagreement of the nozzle diameter was detected with the linear measure.
Thereisapossibilityofthelinearmeasuredirtandthenozzledirt,pleaseconrm
whether a different nozzle has adhered.
-----
801b01 Lightning Surge alarm
Lightning Surge Protector works; Q204.
-----
801b02 Lightning Surge alarm
Lightning Surge Protector works; Q204. Running continue.
-----
801b03 Lightning Surge alarm
Protective Fuse error of lightning Surge Protector. Exchange the fuse.
-----
801c05 Information
Warm start mode was canceled.
-----
801c06 Information
The machine stopped by the automatic stop function.
-----
1109-006