4OM-1603-007_w.pdf - 第291页

4OM-1603 3-1 16 3. Error IDs and Remedial Procedures : Chap.3 Error ID Error Name, Description, Cause, and Remedy 4b300d Cutter Error T est mode of cutter is valid. Please clear the check of [Cutter Movement disable] in …

100%1 / 379
4OM-1603
3-115
3. Error IDs and Remedial Procedures : Chap.3
Error ID Error Name, Description, Cause, and Remedy
4b02803 PCB-ID communication Error.
A problem was found in the unit PCB ID information.
Delete the P.C.B.-ID information after removing the P.C.B.
4b2c01 Error in connection between CPU
Failed in communications with the Control CPU.
-----
4b2c02 Error in connection between CPU
Failed in communications with the Recog. CPU.
-----
4b3001 Cutter Error
Program Error(There is a operation mode which is not set)
-----
4b3002 Cutter Error
There is a problem in Cutter-axis. (Zeroing operation)
-----
4b3003 Cutter Error
There is a time-out in Cutter-axis.(Zeroing operation start)
-----
4b3004 Cutter Error
Cutter-axis Time-out(Zeroing)
-----
4b3005 Cutter Error
Zeroing of Cutter-axis is not completed.
-----
4b3006 Cutter Error
There is a problem in Cutter-axis. (Positioning Operation)
-----
4b3007 Cutter Error
Cutter-axis Time-out(Positioning Operation)
-----
4b3008 Cutter Error
Alarm of Cutter-axis was detected.
-----
4b3009 Cutter Error
Recede operation was executed because alarm was detected during positioning
operation of Cutter-axis.
Pleaseconrmwhetherthereisanerrorincutterunit(Beingjammedincutter
layer)
4b300a Cutter Error
Can not communicate with SV-NET P.C.B.
PleaseconrmAE-LINKwiringandPowerwiring.
4b300b Cutter Error
Can not communicate with Driver
PleaseconrmPowerwiringandAE-LINKwiringofdriverinCutterunit.
4b300c Cutter Error
Time-out of waiting for initializing completely
PleaseconrmAE-LINKwiringandPowerwiring.
1109-006
4OM-1603
3-116
3. Error IDs and Remedial Procedures : Chap.3
Error ID Error Name, Description, Cause, and Remedy
4b300d Cutter Error
Test mode of cutter is valid.
Please clear the check of [Cutter Movement disable] in the screen of test mode.
4b300e Cutter Error
The set of operation mode of Cutter is "Disable".
Please set operating mode of Cutter "Enable".
4b300f Cutter Error
Cutter can not move because Feeder Base is in downward position.
Please press READY switch of Feeder Base and move Feeder base to input
position.
4b3010 Cutter Error
Cutter can not move because Feeder Base in not positioned correctly.
Please connect connector of Feeder base.
4b3011 Cutter Error
Failed in reading the number of connection axes.
PleaseconrmAE-LINKwiringandPowerwiring.
4b3012 Cutter Error
Communication status Error
PleaseconrmAE-LINKwiringandPowerwiring.
4b3013 Cutter Error
Communication status Error(Stand by)
PleaseconrmAE-LINKwiringandPowerwiring.
4b3014 Cutter Error
Communication Status Error(Alarm)
PleaseconrmthewiringofdriverinFeederBaseunit
4b3015 Cutter Error
Communication Status Error(OT)
PleaseconrmthewiringofOriginSensor.
4b3016 Cutter Error
Communication Status Error(Connection O)
PleaseconrmAE-LINKwiringandPowerwiring.
4b3017 Cutter Error
Communication Status Error(Driver Alarm)
PleaseconrmthewiringofdriverinFeederBaseunit
4b3018 Cutter Error
Communication Status Error(SV-NET stopping)
PleaseconrmAE-LINKwiringandPowerwiring.
4b3019 Cutter Error
Communication Status Error(Out of Connection number)
PleaseconrmAE-LINKwiringandPowerwiring.
4b301a Cutter Error
Communication Status Error(SV-NET Error)
PleaseconrmAE-LINKwiringandPowerwiring.
4b301b Cutter Error
Cutter-axis is not connected.
PleaseconrmAE-LINKwiringandPowerwiring.
1109-006
4OM-1603
3-117
3. Error IDs and Remedial Procedures : Chap.3
Error ID Error Name, Description, Cause, and Remedy
4b301c Cutter Error
Failed to start-up Communication of SV-NET
PleaseconrmAE-LINKwiringandPowerwiring.
4b301d Cutter Error
Failed to reset Alarm of Cutter-axis
----
4b301e Cutter Error
It returned to its Origin because Alarm of Cutter-axis was detected during
Positioning
Please check Feeder whose Number is close one indicated.
4b301f Cutter Error
Cannotturnontheservomotorofcutterunitwithinaspeciedtime.
----
4b3101 Cutter(Servo Error)
Error of Power Driver, Over-current
Check out motor wiring or exchange both motor and driver.
4b3102 Cutter(Servo Error)
Overload Alarm
Check out motor wiring or replace both motor and driver.
Either,Conrmwhetherthereischockedupwithcutterpieces.
Please check it because there is a possibility that the fuse in cutter-axis is
broken.
4b3103 Cutter(Servo Error)
Speed Alarm
Need to adjust motor gain again.
4b3104 Cutter(Servo Error)
Multi-rotation Error
Check motor wiring or exchange motor.
4b3105 Cutter(Servo Error)
The value of Deviation Counter was over the set value
Check the wiring of Origin sensor. Either, replace a driver.
Please check it because there is a possibility that the fuse in cutter-axis is broken.
4b3106 Cutter(Servo Error)
Power Drive detected temperature error.
Ambient Temperature is too high. Exchange driver.
4b3107 Cutter(Servo Error)
Sensor Error
ConrmthewiringofMotorEncoder.Either,exchangemotor
4b3108 Cutter(Servo Error)
High Drive voltage
Insufcientpowercapacity.Exchangedriver.
4b3109 Cutter(Servo Error)
Low drive voltage
PleaseconrmtheoperatingPowerwiringwhichisinsertedtodriver.
4b310a Cutter(Servo Error)
Reading Error on permanent memory
Exchange Driver
1109-006