4OM-1603-007_w.pdf - 第138页

4OM-1603 2-7 2. Management Information : Chap.2 Management Information Code Display Area A (The outline of the Management Information) Display Area B (The details of the Management Information) 013102 Feeder set Err The …

100%1 / 379
4OM-1603
2-6
2. Management Information : Chap.2
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
011706 PCB positioning
Please set PCB positioning. [Output position] of [Lane A].
011707 PCB positioning
Please set PCB positioning [Input position] of [Lane A].
011708 PCB positioning
Please set PCB Positioning [Input or Output] of [Lane B].
011709 PCB positioning
Please set PCB Positioning [Output position] of [Lane B].
01170a PCB positioning
Please set PCB positioning [Input position] of [Lane B].
01170b PCB positioning
Please set PCB positioning of input position on PCB transfer menu.
01170c PCB positioning
Please set PCB positioning of [Lane A] input position on PCB transfer menu.
01170d PCB positioning
Please set PCB positioning of [Lane B] input position on PCB transfer menu.
011901 Headunsettledcomp.conrmation
An unsettled component was detected. Please discard the component. In case of
the "Pauses" condition, perform the operation for interruption.
011a01 Nozzlestockerlowerlimitconrmation
Please perform All zeroing.
011c01 Nozzlearrangementconrmation
The nozzle arrangement of the Current Program differs from it of Head.
011c02 Nozzlearrangementconrmation
ThestoragespaceoftheNozzleisinsufcient.PleasesecureNozzleStockerthe
Nozzle storage space. (Block1)
011c03 Nozzlearrangementconrmation
ThestoragespaceoftheNozzleisinsufcient.PleasesecureNozzleStockerthe
Nozzle storage space. (Block2)
011c04 Nozzlearrangementconrmation
TheNozzleusedisinsufcient.PleasearrangetheNozzleused.(Block1)
011c05 Nozzlearrangementconrmation
TheNozzleusedisinsufcient.PleasearrangetheNozzleused.(Block2)
012a01 Tray shortage Comp (Block1)
Please supply Tray Cmpnt, close Tray Safety door and push Tray Ready
SW(Block1).
012a02 Tray shortage Comp (Block1)
There is the shortage components. Please supply the components.
012b01 Tray shortage Comp (Block2)
Please supply Tray Cmpnt, close Tray Safety door and push Tray Ready
SW(Block2).
012b02 Tray shortage Comp (Block2)
There is the shortage components. Please supply the components.
013101 Feeder set Err
A pickup miss comp is detected.(Block1)
1109-006
4OM-1603
2-7
2. Management Information : Chap.2
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
013102 Feeder set Err
The feeder latch worked off. (Block1)
013103 Feeder set Err
A pickup miss comp is detected.(Block2)
013104 Feeder set Err
Feeder Latch worked off.(Block2)
013105 Feeder set Err
Not connect selected feeder.
013b01 Feeder Ready SW
Please wait stage ready on
013c01 Stage Ready SW
Please wait feeder ready on
013c02 Stage Ready SW
Do not open safety cover while line sensor program updating.
014101 Operation Parameter
Test mode of transfer set "Disable" in pass mode.
Check setting.
014102 Operation Parameter
Operation Mode both Lane A, B is [STOP]. Please execute after reset it.
014103 Operation Parameter
Operation Mode is set except [Placement]. Please set [Placement when do 1
Cmpnt placement.
014201 Device System Setup
Please set Input Machine Output Mode [SMEMA Mode].
014202 Device System Setup
Please set Output Machine Output Mode [SMEMA Mode].
014b01 Nozzle Placement Data Check
Current Program Data differs from Nozzle Arragement Data of Nozzle Stocker.
015001 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head1).
Set type "HA09" nozzle as Nozzle1 on Head.
015002 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head2).
Set type "HA09" nozzle as Nozzle1 on Head.
015003 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head1).
Set type "HA09" nozzle on Head.
015004 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head2).
Set type "HA09"nozzle on Head.
015005 Nozzle Location Check
"NotfoundttingnozzleforTeaching(Head1).
Set type "FF01"or "FF02" nozzle on Head.
015006 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head2).
Set type "FF01"or "FF02" nozzle on Head.
1109-006
4OM-1603
2-8
2. Management Information : Chap.2
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
015007 Nozzle Location Check
The different type nozzle is already set(Head1).
Please remove it.
015008 Nozzle Location Check
The different type nozzle is already set(Head2).
Please remove it.
015009 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head1).
Set type "FF01"or "FF02" nozzle as Nozzle2 on Head.
01500A Nozzle Location Check
NotfoundttingnozzleforTeaching(Head2).
Set type "FF01"or "FF02" nozzle as Nozzle2 on Head.
01500B Nozzle Location Check
NotfoundttingnozzleforTeaching(Head1).
Set type "VF02" nozzle on calibrate position.
01500C Nozzle Location Check
NotfoundttingnozzleforTeaching(Head2).
Set type "VF02" nozzle on Head.
01500D Nozzle Location Check
NotfoundttingnozzleforTeaching(Head1).
Set type "HA09" or "VF02" nozzle on Head.
01500E Nozzle Location Check
NotfoundttingnozzleforTeaching(Head2).
Set type "HA09" or "VF02" nozzle on Head.
01500F Nozzle Location Check
NotfoundttingnozzleforTeaching(Head1).
Please set type "HA09" nozzle in the stocker position where nozzle can change.
015010 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head2).
Please set type "HA09" nozzle in the stocker position where nozzle can change.
015011 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head1).
Please set type "FF01" or "FF02" nozzle in the stocker position where nozzle can
change.
015012 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head2).
Please set type "FF01" or "FF02" nozzle in the stocker position where nozzle can
change.
015013 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head1).
Please set type "BF02" nozzle in the stocker position where nozzle can change.
015014 Nozzle Location Check
NotfoundttingnozzleforTeaching(Head2).
Please set type "BF02" nozzle in the stocker position where nozzle can change.
1109-006