4OM-1603-007_w.pdf - 第42页
Safety Precautions Safe-31 1OM-1603 5. Alert Labels 1 108-005 No. Alert Labels and Description (19) Description Attach the nozzles correctly in the nozzle stockers (housings). Do not operate the machine with a nozzle b…
Safety Precautions
Safe-30
1OM-1603
5. Alert Labels
1108-005
No. Alert Labels and Description
(16)
01-0035-
Description
Because the temperature of this section is very high, do not touch. Doing so might
cause a burn.
(17)
Description
Do not put any feeder sideways nor tools on the feeder bases. Otherwise, the
machine will break down.
(18)
Description
If you put your hand or a heavy object on the backup table while working inside the
machine, the backup table may become deformed due to an excessive load.
Safety Precautions
Safe-31
1OM-1603
5. Alert Labels
1108-005
No. Alert Labels and Description
(19)
Description
Attach the nozzles correctly in the nozzle stockers (housings).
Do not operate the machine with a nozzle being left on the nozzle stocker shutter.
Otherwise, the machine may break down.
(20)
Description
If you put your hand or a heavy object on the backup table while working inside the
machine, the backup table may become deformed due to an excessive load.
(21)
Description
Keep the linear guide grooves clear of any object. Otherwise, an object in the
groove may be trapped in the moving part, causing the machine to be damaged.
Safety Precautions
Safe-32
1OM-1603
1108-002
No. Alert Labels and Description
(22)
Description
Unless the lter holder is set correctly in place, a pickup error will occur or the
lter will come off and cause an interference with a head. The head may also be
damaged.
(23)
Description
Be sure to read the instruction manual carefully for correct operations before use.
If the machine is operated incorrectly, it might cause a breakdown of the machine.
(24)
10-0289-
The connector located on the lower section is not a LAN connector.
Do not connect it to anything except for the specified conveyor cable.
Description
Do not connect any conveyor cable other than specied.
If any conveyor cable other than specied one is connected, the machine may break
down.
(25)
10-0304-
Do not touch your hand to the Reference Mark Block.
When a strong force is given to the reference mark block,
it might be deformed.
Description
Do not put your hand on the reference mark block.
When a strong force is given to the reference mark block, it might be deformed.
5. Alert Labels