2OM-1064-002.pdf - 第111页
3. Example of Pattern Program Creation 0004-002 2-99 Tg0247-PM-PM 3.3 Pattern Program Data Sheet Before creating or editing pattern program data, refer to the detailed descrip- tion of each data editing in items (2.2) an…
3. Example of Pattern Program Creation
(2) Example of Data Creation
Use placement data (P) U01 and placement data (O) U01.
Placement Data (P) U01
Enter “0” (zero) in all data fields of the last step and “E” as a
control command.
Fig. 2.86
Enter “0” (zero) in all data fields of the last step and “P” or
“Q” as a control command.
Fig. 2.85
Placement Data (O) U01
P-NO. X(mm) Y(mm) Z(THETA) H(mm) FDR S V C COMMENT
0000 +0.00 +0.00 +0
°
00’ +0.00 000 - 00 -
0001 +5.00 +20.00 +0
°
00’ +0.00 101 - 00 -
0002 +15.00 +10.00 +180
°
00’ +0.00 201 - 00 -
0003 +25.00 +10.00 +90
°
00’ +0.00 301 - 00 -
0004 +0.00 +0.00 +0
°
00’ +0.00 000 - 00 P
O-NO. X(mm) Y(mm) Z(THETA) H(mm) C COMMENT
0000 +0.00 +0.00 +0
°
00’ +0.00 -
0001 +5.00 +5.00 +0
°
00’ +0.00 -
0002 +65.00 +35.00 +180
°
00’ +0.00 -
0003 +5.00 +40.00 +0
°
00’ +0.00 -
0004 +65.00 +70.00 +180
°
00’ +0.00 -
0005 +100.00 +5.00 +270
°
00’ +0.00 -
0006 +70.00 +65.00 +90
°
00’ +0.00 -
0007 +0.00 +0.00 +0
°
00’ +0.00 E
9910-001 2-98 Tg0247-PM-PM
3. Example of Pattern Program Creation
0004-002 2-99 Tg0247-PM-PM
3.3 Pattern Program Data Sheet
Before creating or editing pattern program data, refer to the detailed descrip-
tion of each data editing in items (2.2) and (2.3) and fill in this sheet (attached
at the end of this manual) with required parameters.
Fig. 2.91
OPERATION DATA
PROGRAM NAME
COMMENT #1
COMMENT #2
DATE OF PREP
PREPARED BY
COMPONENT DATA (TAPE FEEDER)
PROGRAM NAME
COMMENT #1
COMMENT #2
DATE OF PREP
PREPARED BY
PLACEMENT DATA (P) U_
PROGRAM NAME
COMMENT #1
DATE OF PREP
PREPARED BY
PLACEMENT DATA (V) U_
COMMENT #2
4. PATTERN PROGRAM Display
4.1 Operation
(1) When the [PATTERN PROGRAMMING] key is pressed at the “DATA
EDIT” display, the following display appears on the screen.
4. PATTERN PROGRAM Display
Fig. 2.92
(2) Select the program name to be edited.
(3) Select the desired operation key.
(4) The corresponding display opens for operation.
0004-002 2-100 Tg0247-PM-PM