2OM-1064-002.pdf - 第249页

Accompanying Material 9910-001 A-1 Tg0247-PM-PM

100%1 / 258
5. DELETE NOZZLE Display
When the [DELETE NOZZLE] key is pressed at the “NOZZLE LIBRARY
INFO” display (Fig. 8.1), the following display appears on the screen.
*1
*2
5. DELETE NOZZLE Display
Fig. 8.11
Operation Procedure
Deletion of Nozzle ID
(1) Move the line cursor to the nozzle ID to be deleted with the [ ] , the
[ ], the [NEXT PAGE], or the [PREV. PAGE] key.
(2) When the [DELETE] key *1 is pressed, the selected nozzle ID is
deleted.
Deletion of All Nozzle IDs
(1) When the [SELECT ALL UNUSED NOZZLE] key *2 is pressed, all
nozzle IDs are selected and the background color of the “NOZZLE
ID LIST (xxx/100)” data field turns blue.
(2) When the [DELETE] key *1 is pressed, all nozzle IDs are deleted.
Note: The nozzle IDs used in the current pattern program are not de-
leted.
• When the [SELECT ALL UNUSED NOZZLE] key is pressed, the back-
ground color of the “NOZZLE ID LIST (xxx/100)” data field turns
blue, indicating that all nozzle IDs are selected. When the [SELECT
ALL UNUSED NOZZLE] key is pressed again under this condition,
the selection of all nozzle IDs is canceled.
9910-001 8-12 Tg0247-PM-PM
Accompanying Material
9910-001 A-1 Tg0247-PM-PM
PROGRAM NAME
COMMENT #1
COMMENT #2
OPERATION DATA
X LCTN. . mm
Y LCTN. . mm
FIDUCIAL
MARK #1
MARK CODE
X LCTN. . mm
Y LCTN. . mm
FIDUCIAL
MARK #2
MARK CODE
X LCTN. . mm
Y LCTN. . mm
FIDUCIAL
MARK #3
MARK CODE
X (Horizontal)
· mm
Y (Vertical)
· mm
P.C.B. SIZE
T (Thickness)
· mm
X (Horizontal)
± · mm
Y (Vertical)
± · mm
MANUAL
OFFSET
Z (Theta)
± ° ´
P.C.B. HEIGHT OFFSET
± · mm
PLACEMENT MODE
PLACE / PASS
TOP · mm
PRE-PLACED
COMPONENT
THICKNESS
BOTTOM · mm
FEEDER NO. OFFSET
±20 · ±100 · ±120
P.C.B. POSITIONING REF.
L-BACK, L-FRONT,
R-FRONT, R-BACK
DATUM
OUTSIDE, HOLE
P.C.B.
LOCATE
SEQUENCE
STANDARD, MODE1
DATE OF PREP.
PREPARED BY
P.E.C. RECOGNITION
ON, OFF
P.E.C. RECOGNITION
BEAM
BEAM-A, BEAM-B,
BOTH BEAM
P.E.C. RECOG. TIMING
AFTER PU, BEFORE PU
GLOBAL
OFF, 1PT., 2PT., 3PT.
IMAGE
ON/OFF
P.E.C.
RECOGNITION
MODE
LOCAL
ON/OFF
RECOVERY BLOCK
ON, OFF
UNIT P.C.B. B.B.R. FUNCTION (Option)
MODE
OFF, NORMAL,
OPTIONAL
IMAGE
BLACK, WHITE
UNIT P.C.B.
B.B.R.
BEAM
BEAM-A, BEAM-B
MODE
ON, OFF
X LCTN.
. mm
OVERALL
P.C.B.
B.B.R.
Y LCTN.
. mm
UNIT P.C.B.
SEQUENCE
MARK MODE,
RECOG. MODE
Pattern Program Data Sheet OPERATION DATA
9910-001 A-2 Tg0247-PM-PM