2OM-1064-002.pdf - 第17页
*2 *1 2.1.1 PROGRAM CHECK Display When the “NAME (XX/XX)” key of the program data to be checked is se- lected and the [PROGRAM CHECK] key is pressed at the “P A TTERN PRO- GRAM” display (Fig. 2.1), the following display …
2. Pattern Program
*7 [PREV. PAGE] Key
When this key is pressed, the previous page opens.
*8 [PROGRAM CHANGE] Key
Press this key to change the current program.
The “PROGRAM CHANGE” display opens.
(Refer to “3. Program Change of Section 4 in Volume 1” for details.)
*9 [PROGRAM CHECK] Key
Press this key to check the selected program.
*10 [PROGRAM DELETE] Key
Press this key to delete pattern program data.
*11 [PROGRAM EDIT] Key
Press this key to edit the selected program data. Another “PATTERN PRO-
GRAM EDIT” display opens for data editing.
*12 The results “OK” or “NG” of the program check operation is displayed
before each program No.
*13 [USED NOZZLE INFORMATION] Key
When this key is pressed, the “USED NOZZLE INFORMATION” dis-
play opens, indicating the nozzle IDs and quantity used in the pattern pro-
gram and the nozzles set in the nozzle stockers.
*14 [PLACEMENT DATA SORTING] Key
When this key is pressed, the “PLACEMENT DATA SORTING” display
appears on the screen, enabling the sorting of the component placement
order in the selected pattern program.
9910-001 2-4 Tg0247-PM-PM
*2
*1
2.1.1 PROGRAM CHECK Display
When the “NAME (XX/XX)” key of the program data to be checked is se-
lected and the [PROGRAM CHECK] key is pressed at the “PATTERN PRO-
GRAM” display (Fig. 2.1), the following display appears on the screen.
2. Pattern Program
9910-001 2-5 Tg0247-PM-PM
Fig. 2.2
*1 The result of checking is displayed.
“GOOD” : This appears when no error is found.
“NO GOOD” : This appears when an error is found.
*2 When the result of checking is “NO GOOD”, the contents of the error are
displayed.
Note: Even if the result of the check is "GOOD", alarm guidance requesting
"reconfirm the program as data" might be displayed.
*2
*1
2. Pattern Program
2.1.2 PATTERN PROGRAM DELETE Display
When the “NAME (XX/XX)” key of the program data to be deleted is selected
and the [PROGRAM DELETE] key is pressed at the “PATTERN PROGRAM”
display (Fig. 2.1), the following display appears on the screen.
• The pattern program is deleted.
• Use this function when the backup pattern program data is corrupted due to
the battery shortage, etc.
Refer to “4.9 Remedial Operation for Error Pattern Program Data of Section
2” for details.
9910-001 2-6 Tg0247-PM-PM
Fig. 2.3
*1 [DELETE] Key
When this key is pressed, the selected program is deleted.
*2 [ALL] Key
When this key is pressed, all programs are deleted.