2OM-1064-002.pdf - 第231页

Section 7 Nozzle Stocker Data 9910-001 7-1 Tg0247-PM-PM

0004-001 6-6 Tg0247-PM-PM

Section 7

Nozzle Stocker Data

9910-001 7-1 Tg0247-PM-PM

1. NOZZLE STOCKER DATA Display

At this display, nozzle types (IDs) set for the nozzle stocker section in the

machine can be registered.

The machine performs the nozzle change operation during automatic opera-

tion according to this nozzle stocker data.

The machine checks in which stocker the nozzle specified in the component

library exists and searches its address. According to the results, the machine

performs the nozzle attachment or change operation.

Nozzle Change Operation during Automatic Operation

• The nozzles attached to the heads are returned to their original nozzle stocker

addresses (addresses in which the nozzles were attached).

• When several nozzles (places) of the same type are set in the nozzle stocker

section, the machine starts to search the smallest address first and performs

the operation based on the searched address. After that, the machine pro-

ceeds to the subsequent address (next smallest address) and keeps on this

repeatedly.

• When the nozzles on both Heads #1 and #2 on the X/Y beam must be changed

simultaneously during automatic operation, the machine performs the at-

tachment operation for the new nozzles after the attached nozzles are stored

in the nozzle stocker.

• The machine automatically allocates nozzles to the heads and perform the

nozzle change operation during automatic operation. (Internal Control)

When the [PLACEMENT HEAD NOZZLE DATA] key is pressed at the “DATA

EDIT” display, the following display appears on the screen.

Fig. 7.1

*10

1. NOZZLE STOCKER DATA Display

9910-001 7-2 Tg0247-PM-PM