YSM20R_YSM20WR_Ope_E.pdf - 第135页

2-32 2 Basic operation 3.8 Pick Pos. (Pickup position of fset) n NOTE Pickup position offset function applies to the components satisfying the following conditions. • The correct Mode on [Machine] - [Speciﬁcation Infor m…

2-31

Basic operation

3.7 Badmark

The [Badmark] screen shows the recognition results of badmarks such as "Board, Block" and "Local" badmarks.

Monitor: Badmark

24218-KMK-00

• Table Select

Select a head unit.

• Badmark Type

Select the type of the badmark such as "Board, Block" or "Local".

• X, Y

Shows the board data input values (by taking block offset amount into account).

• Result

Makes an "OK" or "NG" decision based on the badmark recognition result.

OK: Failed in recognizing a bad mark: Means components are mounted.

NG: Succeeded in recognizing a bad mark: Means components are not mounted.

2-32

Basic operation

3.8 Pick Pos. (Pickup position offset)

NOTE

Pickup position offset function applies to the components satisfying the following conditions.

• The correct Mode on [Machine] - [Speciﬁcation Information] - [Pick Position Speciﬁcation] is set to either "Use"

or "Use with Feeder Correction".

• Component picked up with a nozzle that the "Available" on [Machine] - [Speciﬁcation Information] - [Pick Position

Speciﬁcation] is set to "Use".

• Component that "E: Pick Pos Correction" is set to "Use" on [Parts] - [Option] tab screen of the board data.

This screen appears when the pickup position offset function is used. This screen allows to check how the

pickup position of the object component (feeder) is corrected. If either the X or the Y correction amount

exceeds the warning zone or the error zone set up in the machine setting, the corresponding component in the

components list changes its color.

Display color

Color of row Status Description

Yellow Warning Exceeds warning level figure for each nozzle data set in pickup position offset specifications.

Red Error Exceeds error level figure for each nozzle data set in pickup position offset specifications.

NOTE

Warning generated: The machine generates an error message. The yellow lamp on the signal lamp tower ﬂashes. The

machine, however, can continue the operation.

Experiencing error: The machine generates an error message when ﬁnishing producing one board. The machine

cannot continue the operation.

NOTE

The numerical values speciﬁed in the warning level and error level of the pickup position offset speciﬁcation are

machine data setting items. Accessing such parameters require the administrator level of authority.

Monitor: Pick Pos. (Pickup position offset)

24219-KMK-00

• No.

Displays the component No. (Parts screen data No.).

• Set No.

Displays the feeder set No.

• Parts Name

Displays the component name.

2-33

Basic operation

• Tape Type

The Tape Type shows the type of tape when the machine processes component tapes. It shows the method of supplying

components when processing tray components.

• X (mm), Y (mm)

Displays the amount of pickup position offset. The figure shown is the amount of error from the nozzle center position

towards the X-direction and Y-direction.

• Pick Rate (%)

Displays the component pickup rate of the nozzle for which the pickup position offset function is on (enabled).

• Count

Displays the number of components that were picked and placed by the nozzle for which the pickup position offset

function is on (enabled).

• [All Reset] button

This button clears and resets pickup position offset data for all components shown on the monitor.

• [Current Reset] button

Clears and resets pickup position offset data for a component selected from among the components shown on the

monitor display.