YSM20R_YSM20WR_Ope_E.pdf - 第224页
3-36 3 Flow fr om starting up machine to production 3 Start mounting operation. 1. Press the [ST ART] button on the operation panel. 2. (Only for the first time after setting block skip) The block skip confirmation messa…
3-35
3
Flow from starting up machine to production
2
Select the block to be skipped.
Each block with a check box appears on the “Block Skip setting dialog".
1. Either tick the check box of the block to be skipped or select the block and press the [Check] button
to check the block.
2. Press the [OK] button to exit the “Block Skip setting dialog".
TIP
When existing the “Block Skip setting dialog" after setting the block skip, the [Block Skip] button on the “Setup” screen
is held pressed.
Selecting the blocks to be skipped
“Block Skip setting dialog ”
[Check] button
Tick the checkbox of block to be skipped.
24326-KMK-00
The block data designated to be skipped can be checked on the “Board” – “Mount” screen.
A message “Skip” appears on each mounting point to be block-skipped and it is unable to edit on this
screen. However, the block number in the “Original Block No.” column which the mounting point
belongs to can be checked.
Checking block skip
[Board] - [Mount] screen
Original Block NoMessage "Skip" is displayed.
24327-KMK-00
3-36
3
Flow from starting up machine to production
3
Start mounting operation.
1. Press the [START] button on the operation panel.
2. (Only for the first time after setting block skip) The block skip confirmation message appears. Check
the descriptions and press the [OK] button.
3. Press the [START] button on the operation panel once again to start up the automatic operation.
Block skip confirmation message
24328-KMK-00
