YSM20R_YSM20WR_Ope_E.pdf - 第180页

2-77 2 Basic operation 5 Set all the necessary pallets on the magazine. n NOTE Set the pallets on the place which is set in "Pallet start/end" on [Parts] - [Tray] tab and "Pallet pitch Z". 6 Close the…

100%1 / 229
2-76
2
Basic operation
5.3.2 Setting the pallet in the magazine
This section describes the procedure to set the pallet on the magazine for sATS30NS as an example.
1
Install the pallet retainer rod.
2
Put the magazine on a horizontal place.
3
Open the latch.
The latch can be opened by hands.
4
Set the pallet.
Confirm the direction and the setting number of the pallet, then insert the pallet to the magazine till it is
in touch with far end where there is the retainer rod.
Setting the pallet on the magazine on
ex. sATS30NS
Pallet retainer rod
Step1 Install the pallet retainer rod
Step3 Open the latch.
Latch
Step4 Set the pallet.
Step6 Close the latch.
Check the setting number
of the pallet.
Latch
Insert the pallet to
far end of the magazine.
23240-KMK-004
2-77
2
Basic operation
5
Set all the necessary pallets on the magazine.
n
NOTE
Set the pallets on the place which is set in "Pallet start/end" on [Parts] - [Tray] tab and "Pallet pitch Z".
6
Close the latch.
2-78
2
Basic operation
5.4 Exchanging magazine
This section describes the procedure to exchange the magazine in the tray component supply unit for sATS30NS
as an example.
n
NOTE
If the tray components on the pallet are used up, the corresponding pallet indicator starts blinking, and then
component supply indication (components loss error/ parts supply indicator light is on) is warned on the mounter.
1
Release the EMERGENCY STOP.
If the EMERGENCY STOP button is on, release it and press [READY] button to switch the servo on.
2
Select the magazine.
Turn the magazine exchange switch to the magazine which has the pallet to be exchanged, magazine
1 or 2. When the magazine exchange switch is turned to one side, the selected magazine moves to the
standby position. The magazine door is unlocked, then the door indicator of the magazine exchange
switch is off.
Magazine exchange switch
Selecting magazine
Door indicator (Light on)
Magazine exchange switch
Selecting
magazine
Door indicator (Lights off)
23241-KMK-00
c
CAUTION
Automatic operation stops due to an error if selecting a magazine for the pallet currently in use.
n
NOTE
If the pallet station is set with "Use" in machine setting and the magazine exchange switch is turned to the magazine
which has the pallet on the pallet station, the pallet on the pallet station is returned to the magazine first.
n
NOTE
If the magazine exchange switch is set to "RUN", the magazine door doesn't open.