YSM20R_YSM20WR_Ope_E.pdf - 第182页
2-79 2 Basic operation 3 Open the magazine door . 4 Pull out the magazine. 1. Turn the magazine clamp counterclockwise with pulling it, then the clamp i s released. 2. Hold the magazine handle on top of the magazine to p…
2-78
2
Basic operation
5.4 Exchanging magazine
This section describes the procedure to exchange the magazine in the tray component supply unit for sATS30NS
as an example.
n
NOTE
If the tray components on the pallet are used up, the corresponding pallet indicator starts blinking, and then
component supply indication (components loss error/ parts supply indicator light is on) is warned on the mounter.
1
Release the EMERGENCY STOP.
If the EMERGENCY STOP button is on, release it and press [READY] button to switch the servo on.
2
Select the magazine.
Turn the magazine exchange switch to the magazine which has the pallet to be exchanged, magazine
1 or 2. When the magazine exchange switch is turned to one side, the selected magazine moves to the
standby position. The magazine door is unlocked, then the door indicator of the magazine exchange
switch is off.
Magazine exchange switch
Selecting magazine
Door indicator (Light on)
Magazine exchange switch
Selecting
magazine
Door indicator (Lights off)
23241-KMK-00
c
CAUTION
Automatic operation stops due to an error if selecting a magazine for the pallet currently in use.
n
NOTE
If the pallet station is set with "Use" in machine setting and the magazine exchange switch is turned to the magazine
which has the pallet on the pallet station, the pallet on the pallet station is returned to the magazine first.
n
NOTE
If the magazine exchange switch is set to "RUN", the magazine door doesn't open.
2-79
2
Basic operation
3
Open the magazine door.
4
Pull out the magazine.
1. Turn the magazine clamp counterclockwise with pulling it, then the clamp is released.
2. Hold the magazine handle on top of the magazine to pull out the magazine along the guide.
3. Install the pallet retainer rod.
4. Hold the carry handles securely and lift down the magazine from the guide.
Pulling out the magazine
Guide
Releasing clamp
Pull forward.
Turn counterclockwise
and return.
Magazine clamp
Magazine handle
Pallet retainer rod
Carry handles
Magazine
door
23242-KMK-00
2-80
2
Basic operation
5
Set the new magazine.
1. Temporarily put the magazine containing components supplied with aligning the bottom groove with
the guide.
2. Put the pallet retainer rod into the magazine top.
3. Hold the magazine handle on the magazine top and insert it to the rack till it is touch in far end.
4. Turn the magazine clamp clockwise with pulling it, then magazine is clamped.
Setting the magazine.
Clamp the magazine.
Pull forward.
Guide Magazine clamp
Turn clockwise and return.
23243-KMK-00
6
Press the pallet indicator button.
Press the "indicator" button for the number of the pallet where the components are supplied.
n
NOTE
When the tray components on the pallet are used up, the corresponding pallet indicator starts blinking. After setting
the new pallet, pressing the "indicator" button changes its blinking to lighting.
Indicator button
23244-KMK-00