YSM20R_YSM20WR_Ope_E.pdf - 第185页
2-82 2 Basic operation 5.5 Exchanging pallet T his section describes the procedure to exchange a pallet on the tra y component supply unit for sA TS30NS as an example. TIP This manual describes the pallet exchange on the…
2-81
2
Basic operation
7
Close the magazine door.
8
Turn the magazine exchange switch back to "RUN".
The magazine door is locked, and then the door indicator for the magazine exchange switch is on.
2-82
2
Basic operation
5.5 Exchanging pallet
This section describes the procedure to exchange a pallet on the tray component supply unit for sATS30NS as
an example.
TIP
This manual describes the pallet exchange on the magazine. Refer to "sATS30NS Option Manual" for Non-stop pallet
change on the pallet station.
n
NOTE
If the tray components on the pallet are used up, the corresponding pallet indicator starts blinking, and then
components supply indication (components loss error/ parts supply indicator light is on) is warned on the mounter.
1
Release the EMERGENCY STOP.
If the EMERGENCY STOP button is on, release it and press [READY] button to switch the servo on.
2
Select the magazine.
Turn the magazine exchange switch to the magazine which has the pallet to be exchanged, magazine
1 or 2. When the magazine exchange switch is turned to one side, the selected magazine moves to the
standby position. The magazine door is unlocked, then the door indicator of the magazine exchange
switch is off.
Magazine exchange switch
Selecting magazine
Door indicator (Light on)
Magazine exchange switch
Selecting
magazine
Door indicator (Lights off)
23241-KMK-00
c
CAUTION
If the magazine containing the pallet in use during auto operation is selected, an error occurs causing to stop
operation.
n
NOTE
If the pallet station is set with "Use" in the machine setting and the magazine exchange switch is turned to the
magazine which has the pallet on the pallet station, the pallet on the pallet station is returned to the magazine first.
n
NOTE
If the magazine exchange switch is set to "RUN", the magazine door doesn't open.
2-83
2
Basic operation
3
Open the magazine door.
4
Open the latch.
Open the latch on both sides of the magazine by hands.
Opening the latch.
Latch
Latch
23245-KMK-00
5
Exchange the pallet.
1. Pull out the pallet to be changed.
2. Set the pallet containing the components. Confirm the direction and the setting number of the
pallet, then insert it till it is in touch with far end of the magazine.
Exchanging the pallet
Check the pallet setting
number
23246-KMK-00