YSM20R_YSM20WR_Ope_E.pdf - 第78页

1-45 1 Unit names and functions n YSM20WR Dual-lane L = 510 mm type Board transfer direction Conveyor unit Dual-lane L = 510 mm type (Example: Right-to-left flow) 6 1 4 7 8 5 2 3 23143-KMK-00 1. Entrance stopper If a boa…

100%1 / 229
1-44
1
Unit names and functions
n
YSM20WR Dual-lane L = 360 mm type
Board transfer
direction
Conveyor unit
Dual-lane L = 360 mm type (Example: Right-to-left flow)
6
1
4
7
8
5
2
3
23142-KMK-00
1. Entrance stopper
If a board is on mounting position of the stage already, other board carried into the conveyor waits at the position of the
entrance stopper.
2. Main stopper
The board stopper for the mounting position. A board carried into the conveyor is in contact with the main stopper, then
it stops. Dual-lane type has 1 main stopper.
3. Exit stopper
If the machine in down stream doesn't demand a board, the mounted board waits at the position of the exit stopper.
4. Push-up plate
5. Push-up pins
Push-up pins are arranged on the push-up plate depending on the board to be mounted. When a board comes to the
mounting position, these pins secure the board by pushing it up from the bottom.
6. Board hold plate
7. Board clamp plate
When a board comes to the mounting position, the board clamp plate moves up. This clamps the board by pushing its
edges up against the board hold plates.
8. Pin push-up prevention sensor
This sensor stops the push-up plate moving up by detecting the push-up pin pushes up the conveyor frame when the
push-up pins are between the push-up plate and the conveyor frame.
1-45
1
Unit names and functions
n
YSM20WR Dual-lane L = 510 mm type
Board transfer
direction
Conveyor unit
Dual-lane L = 510 mm type (Example: Right-to-left flow)
6
1
4
7
8
5
2
3
23143-KMK-00
1. Entrance stopper
If a board is on mounting position of the stage already, other board carried into the conveyor waits at the position of the
entrance stopper. Dual-lane L = 510 mm type has 2 entrance stoppers. The stopper to be used varies depending on the
board size.
2. Main stopper
The board stopper for the mounting position. A board carried into the conveyor is in contact with the main stopper, then
it stops. Regarding dual-lane type, there is one main stopper.
3. Exit stopper
If the machine in down stream doesn't demand a board, the mounted board waits at the position of the exit stopper.
4. Push-up plate
5. Push-up pins
Push-up pins are arranged on the push-up plate depending on the board to be mounted. When a board comes to the
mounting position, these pins secure the board by pushing it up from the bottom.
6. Board hold plate
7. Board clamp plate
When a board comes to the mounting position, the board clamp plate moves up. This clamps the board by pushing its
edges up against the board hold plates. Dual-lane L = 510 mm type has a small and a large clamp board assemblies per
conveyor.
8. Pin push-up prevention sensor
This sensor stops the push-up plate moving up by detecting the push-up pin pushes up the conveyor frame when the
push-up pins are between the push-up plate and the conveyor frame.
1-46
1
Unit names and functions
n
YSM20WR Single-lane (for transferring heavy board)
6
1
4
7
8
5
2
3
Board transfer
direction
Conveyor unit
Single-lane for transferring heavy board (Example: Right-to-left flow)
23147-KMK-00
1. Entrance stopper
If a board is on mounting position of the stage already, other board carried into the conveyor waits at the position of the
entrance stopper. Single-lane type has 2 entrance stoppers. The stopper to be used varies depending on the board size.
2. Main stopper
The board stopper for the mounting position. A board carried into the conveyor is in contact with the main stopper, then
it stops. For the type of single-lane, there is one main stopper.
3. Exit stopper
If the machine in down stream doesn't demand a board, the mounted board waits at the position of the exit stopper.
4. Push-up plate
5. Push-up pins
Push-up pins are arranged on the push-up plate depending on the board to be mounted. When a board comes to the
mounting position, these pins secure the board by pushing it up from the bottom.
6. Board hold plate
7. Board clamp plate
When a board comes to the mounting position, the board clamp plate moves up. This clamps the board by pushing its
edges up against the board hold plates.
Regarding single-lane type, there are small and large clamp board assembly.
8. Pin push-up prevention sensor
This sensor stops the push-up plate moving up by detecting the push-up pin pushes up the conveyor frame when the
push-up pins are between the push-up plate and the conveyor frame.