EUKYX-199-3100_G5S2_Instruction_Vol3_E.pdf - 第105页

EUKYX 1-56 199-3100 5.18 T able Offset 5. 1 8 T able O f fset The of fset amount (X, Y) is taught when the head i s m ov ed from the b oard positi oning standa rd to the sp ecified distance. [1] [2] [3] [4] Graphic Devel…

EUKYX

1-55199-3100

5.17 Master Noz Lv (Indv.)

This window is not displayed when the multi-functional head is selected.

The master nozzle level is taught individually.

[1]

[3]

[2]

Graphic

Development

F3A98

[1] Teaching Data Display Section

The offset value of the specified head is displayed.

[2] [NOZ.CHG.] button

The "NOZ.CHG." window is displayed. The nozzle is changed by operating the window.

[3] Teaching procedures section

The following buttons are arranged in teaching procedures section.

Select head

Select the head to be taught.

[Noz] Button

Specifies the nozzle to be taught.

When the [Nozzle] button is pressed, the data input window appears.

[Noz. place. pos. move] button

Pressing the button turns the specified nozzle to move to the machine front side when

attaching/detaching nozzle.

[Teach Start] button

Starts the teaching.

[Save] button

Saves the teaching results.

• Teaching Procedures

(1) Select the Head (1 or 2) to be taught.

(2) Press the [Noz] button and select the nozzle No. (from 1 through 15) on the [Noz] selection

window.

(3) Press the [Noz place. pos. move] button to attach the master nozzle.

(4) Press the [Teach Start] button.

(5) Press the [Save] button.

Note

Procedure

EUKYX

1-56199-3100

5.18 Table Offset

The offset amount (X, Y) is taught when the head is moved from the board positioning standard to

the specified distance.

[1]

[2]

[3]

[4]

Graphic

Development

F3A48

[1] Head1/ Head 2 Tabs

When each tab is pressed, the corresponding window of the head for teaching is displayed.

[2] “Teach/Conf” tabs

Switches the "Teach" window and "Conf" window.

[3] Teach/Conf window

The teaching data is displayed when the "Teach" tab is selected.

The confirmation data is displayed when the "Conf" tab is selected.

[4] Teaching procedures section

The following buttons are arranged in teaching procedures section.

Select head

Selects the head to be taught.

[Teach Start] button

Starts the teaching.

[Confirmation] button

Performs the confirmation.

[Save] button

Saves the teaching results.

• Teaching Procedures

(1) Set the jig board on the positioning place.

(2) Select the Head (1 or 2) to be taught.

(3) Press the [Teach Start] button. The teaching results are displayed on the teaching data.

(4) Press the [Confirm] button. The confirmation results are displayed on the confirmation data.

(5) Press the [Save] button.

Procedure

EUKYX

1-57199-3100

5.19 Self Calibration

This window is not displayed when the multi-functional head is selected.

The placement accuracy measurement is automatically performed in the machine and the results

are fed back to the offset data.

[1]

[2]

[3] [4]

[7]

[5]

[6]

Graphic

Development

F3A49

[1] Teach Mode / [Teach Start] button

Switches to the program for placement accuracy adjustment.

[2] Measurement Mode / [Accuracy Confirm1], [Accuracy Confirm2]buttons

Switches to the program for placement accuracy confirmation.

[3] Accur.Conf. Result Re-display

Displays the accuracy confirmation result per stage.

[4] Restore

Restores the backed up head offset data per stage.

[5] Setup

Performs the setup of items below required for self calibration

CNVR Set-up, Noz.Chg., PCB Xfer., and Fdr P-u Tch

[6] Cancel

Cancels the teaching.

[7] Teaching procedures section

The following buttons are arranged in teaching procedures section.

Select stage

Select stage to be taught.

[USL] button

Set the standard value.

[Teach Start] button

Start the teaching.

[END] button

Finish the teaching.

Note