EUKYX-199-3100_G5S2_Instruction_Vol3_E.pdf - 第154页

EUKYX 2-6 199-3100 2.1 Device Offset 2. 1 .4 Conv Wid Pressi ng the [Conv Wid] tab on t he "Device Offs et " wi ndow di spl ays the fol lowi ng window . Graphic Development F3B7A W 1 [mm] / W2 [ mm] Thi s off s…

100%1 / 230
EUKYX
2-5199-3100
2.1 Device Offset
2.1.3 Pos Level
Pressing the [Pos Level] tab on the "Device Offset" window displays the following window.
Graphic
Development
F3B6A
BL [mm] / BR [mm]
These parameters are used to absorb the deviation in the PCB positioning level for the Support pin
up/down operation.
EUKYX
2-6199-3100
2.1 Device Offset
2.1.4 Conv Wid
Pressing the [Conv Wid] tab on the "Device Offset" window displays the following window.
Graphic
Development
F3B7A
W1 [mm] / W2 [mm]
This offset data is used to adjust the conveyor width to the absolute values. Enter the difference
between the actually measured value from the fixed chute to the movable chute and the half of the
specified width, when the conveyor width is set up to the specified one.
W1 Offset : In the case that the actually measured value is larger than half of the specified
one, a positive (+) value must be entered.
W2 Offset : It is not currently used.
Specified width
W1
(+)
(-)
Front Side of Machine
Movable Chute
Fixed Chute
F3B8
EUKYX
2-7199-3100
2.1 Device Offset
2.1.5 Mark Offset
Pressing the [Mark Offset] tab on the "Device Offset" window displays the following window.
Graphic
Development
F3B9A
"Mark (Center)" represents the standard mark position captured by the PEC recognition camera
when the rotational center of the head is moved to the area above the component recognition
camera.
"Mark (Right)" and "Mark (Left)" are the standard mark positions captured by the PEC recognition
camera when the pertinent nozzle is moved to the center of the component recognition camera
with the head being rotated 90° or 270°.
Xm(+)
Ym(+)
Component Recognition
Camera
Head Rotational Center
Standard Mark
Center of PEC Recognition
Camera
Pm. Machine Reference
Coordinate Origin
Standard Mark
Center of PEC Recognition
Camera
Component Recognition
Camera
Head Rotational Center
F3B10