EUKYX-199-3100_G5S2_Instruction_Vol3_E.pdf - 第114页

EUKYX 1-65 199-3100 6.2 MOTOR 6 . 2 M OTO R Thi s wi ndow enab les you t o per form a manu al operation (i nch in g) of each un it and view the cu rrent sys te m info rmat ion. Graphic Development [1] [2] [3] F3A53A [ 1 …

EUKYX

1-64199-3100

6.1 INP / OUT

6.1.3 List Dsp

Pressing the [List Dsp] button on the "INP/OUT" window displays the following window. Check the

sensor I/O status.

Graphic

Development

F3A52A

Status Indicator

Displayed is the status of each section.

EUKYX

1-65199-3100

6.2 MOTOR

This window enables you to perform a manual operation (inching) of each unit and view the current

system information.

Graphic

Development

[1]

[2]

[3]

F3A53A

[1] SELECT BLOCK Buttons

Press 1 or 2 button to display the desired block.

The indication of the "[2] Unit Select Buttons" varies depending on the selected block.

[2] Unit Selection Buttons

Arranged are the unit buttons for the block selected with a block selection button. When a button

is pressed, the corresponding unit is selected.

[3] Display Change Buttons

Pressing any of these buttons, displays the corresponding window.

The description of each window is as follows.

Button Description

Operation The corresponding window enables you to perform a manual

operation (inching) of each unit.

Sys Info The corresponding window enables you to view the current system

information of the machine.

DI stop The corresponding window enables you to view the machine

monitor and parameters.

List The corresponding window enables you to view the status of each

section.

EUKYX

1-66199-3100

6.2 MOTOR

6.2.1 Operation

Pressing the [Operation] button on the "MOTOR" window displays the "Operation" window. The

manual operation (inching) for each unit is available.

[1]

[2]

[3]

[4]

Graphic

Development

F3A54A

[1] "State" Group Box

The following information is displayed.

Crnt posn (Cmd) / Crnt posn (FB) / Total move posn / System state / Run alarm / Servo alarm /

Err code

[2] "Servo sw" Group Box

The following buttons are provided.

[Reset Alm] Button : Resets the alarm to its normal condition.

[Servo ON] Button : Turns on the servomotor.

[Servo OFF] Button : Turns off the servomotor.