EUKYX-199-3100_G5S2_Instruction_Vol3_E.pdf - 第216页
EUKYX 2-68 199-3100 3.3 T ray [ 3] T r ay matr ix initialize mode Select “St andard“ , “Hold“ , “Initi ali ze“ , or “Cancel “ from the drop -d own menu . Standard: If the tray m atrix d ata is the same ty pe and not used…
EUKYX
2-67199-3100
3.3 Tray
3.3 Tray
Pressing the [Tray] tab on the "Auto Operation" window displays the following window.
Graphic
Development
[1]
[2]
[3]
F3B77B
[1] Tray matrix reference set-up
Select “Right“ or “Left“ from the drop-down menu.
[2] Tray matrix update set-up
Select the direction of the component pulling out order from the following 8 patterns.
F3B77C
EUKYX
2-68199-3100
3.3 Tray
[3] Tray matrix initialize mode
Select “Standard“, “Hold“, “Initialize“, or “Cancel“ from the drop-down menu.
Standard:
If the tray matrix data is the same type and not used when changing the production model, it
is continued. If changed to the different ID, it is initialized as (0,0).
Hold:
If the tray matrix data is the same type and not used when changing the production model, it
is continued. If changed to the different ID, it is initialized as (1,1).
Initialize:
The matrix data used for the production models are all initialized as (1,1).
Cancel:
Cancels the selections above and returns to the original “Tray matrix update set-up” screen.
EUKYX
2-69199-3100
4. MACH SETUP
4. MACH SETUP
Pressing the [Sys. Setting] - [Mach Set] buttons displays the following window.
4.1 General
The following describes the contents of "General" tab on "MACH SETUP".
[1]
[2]
[3]
[5]
[4]
[7]
[6]
[12]
[13]
[9]
[10]
[11]
[8]
Graphic
Development
F3B78A