EUKYX-199-3100_G5S2_Instruction_Vol3_E.pdf - 第51页
EUKYX 1-2 199-3100 1. Outline of Menus for Maintenance (Continued from previous page. ) [Sub buttons] DVC Check Reference Item Nos. 6.1.1 6.1 InP Chk InP/OutP 6 6.1.2 OutP Chk 6.1.3 List Dsp 6.2.1 6.2 Operation Motor 6.2…
EUKYX
1-1199-3100
1. Outline of Menus for Maintenance
1. Outline of Menus for Maintenance
The maintenance menu consists of the following menu items and tab sheets.
Menus for Maintenance Reference Item Nos.
Unit Adj. 4
3
Side View Cam
4.2
4.2.1
Dtct.Test
4.2.2
Img list
Noz.Chng. 4.1
5
Unit Chg.
Fdr Base
X Axis grease up
Cnvr.
4.3
Conveyor
4.3.1
PCB Stpr.
4.3.2
4.3.3
4.3.4
Ship.Adj.
(Continued to the next page.)
NL-Axis Org Master Noz Lv
Side View Cam
PCB Recog Light
Cmp Recog Light
Cmp Recog Mag
Mark Light
PEC Recog_Beam
Hd Rot Axis Offset
Cmp Recog Camr Pos
Fly Recog Camr
Hd Rot Center
Noz Incln
Noz Stk Pos
Noz Lv/Pos
5.2
5.1
5.4
Chute Lv 5.3
5.5
5.6
5.7
5.8
5.10
5.11
5.12
5.13
5.9
5.14
5.15
Support pin Pos
5.16
Master Noz Lv (Indv.)
Table
Self Calibration
Slit Pos
5.17
5.18
5.19
5.20
F3A1
EUKYX
1-2199-3100
1. Outline of Menus for Maintenance
(Continued from previous page. )
[Sub buttons]
DVC Check
Reference Item Nos.
6.1.1
6.1
InP Chk
InP/OutP
6
6.1.2OutP Chk
6.1.3List Dsp
6.2.1
6.2
Operation
Motor
6.2.2
(1)
(2)
(3)
Sys Info
System #1 to #4
Axis dt #1 to #4
Servo amp ...
6.3.1
6.3
Light Board
Recog.
6.4
Com.Stat
6.3.2Recog Light
6.3.3Capture Img.
6.3.4Count Board
6.3.5Others
6.5.1
6.5
Application
Prgm.Info.
7
MAINT WN
8
Pass Opn.
6.5.2MC Info
6.5.3Setup Log
[Tabs]
6.2.4
(1)
(2)
(3)
List
Normal
Multi-HD
Firmware
[Tabs]
6.2.3
(1)
(2)
DI stop
State monitor
Parameter
F3A2
EUKYX
1-3199-3100
2. MAINTENANCE
2. MAINTENANCE
This window enables you to adjust the machine, check the performance, and perform various
teaching operations. When the [Maint.] button in the "TOP" page is pressed and the logging-in
operation is performed, the "Maintenance" window appears.
The indication on the window varies depending on the user's access authorization .
Graphic
Development
F3A3
The [Maintenance] main menu buttons are arranged to display the operation windows where each
function in the Machine Maintenance (SPECIAL SEL) is executed.
[Unit Chg.]
Button
Open the "Unit Change" window.
Open the "Unit Adj." submenu.
Open the "Shipment Adj." window.
Open the "DVC Check" submenu.
[Unit Adj.]
Button
[Ship.Adj.]
Button
[DVC Check]
Button
:
:
:
:
Reference
Reference
Reference
Reference
Open the "MAINTWM" window.[MAINT WN]
Button
:
Reference
Open the "Pass Opn." window.[Pass Opn.]
Button
:
Reference
Refer to "3. Unit Change" in Chapter 1
for details.
Refer to "4. Unit Adj." in Chapter 1 for details.
Refer to "5. Shipment Adj." in Chapter 1
for details.
Refer to "6. DVC Check" in Chapter 1
for details.
Refer to "7. MAINTWM" in Chapter 1 for
details.
Refer to "8. Pass Operation (for Emergency)."
in Chapter 1 for details.
F3A4
Note