EUKYX-199-3100_G5S2_Instruction_Vol3_E.pdf - 第171页

EUKYX 2-23 199-3100 2.5 Head 2.5. 1 Head-A Pressi ng the [Head- A] tab on the "Head" window d ispl ays the fo l low ing w indo w . [1] [2] [3] Graphic Development F3B31A [ 1 ] High Sp d. Hd. , Hea d 1 and Hea d…

100%1 / 230
EUKYX
2-22199-3100
2.5 Head
2.5 Head
Pressing the [Head] button on the "Offset Data" window displays the following window.
Graphic
Development
[1]
[5]
[6]
[2]
[3]
[4]
F3B30A
[1] Offset button
When this button is pressed, the offset data for the selected tab is displayed.
[2] Offset Data Display Section
In this section, the offset data selected in step [1] is displayed.
[3] Page Change Button
Using this button, the offset editing page is changed.
[4] [Return] button
When this button is pressed, the window returns to the "Offset Data" window.
[5] [Save] button
When this button is pressed, the input data is saved.
[Cancel] button
When this button is pressed, the input data is cancelled and window returns to the save data.
[6] [Cam1] / [Cam2] button
Switches the component recognition camera.
EUKYX
2-23199-3100
2.5 Head
2.5.1 Head-A
Pressing the [Head-A] tab on the "Head" window displays the following window.
[1]
[2]
[3]
Graphic
Development
F3B31A
[1] High Spd. Hd., Head 1 and Head 2 (X [mm], Y [mm] /Standard)
The set parameters are used to adjust the deviations of the head rotational centers caused
due to the movement of the head U/D axes.
delta Offst. No step Decr.
When no speed deceleration for component placement is specified in the library data and
the position for the placement is calculated, the proper deceleration rate is converted and
added.
Lead
When the library data set at the component placement is for the leaded components, the
value is converted or added in the placement target position calculation using this button.
BGA
When the library data set at the component placement is for the BGA components, the value
is converted and added in the placement target position calculation using this button.
[2] Mlt.Func. Hd. (X [mm], Y [mm])
The set parameters are used to adjust the deviations of the head rotational centers caused due to
the movement of the head U/D axes.
[3] [Standard] Button
When the applicable component is a standard one, the value is converted or added in the
placement target position calculation using this button.
[Lead] Button
When the applicable component is a leaded one, conversion and addition are made while
the target position for placement is being computed.
[BGA] Button
When the applicable component is a BGA/CSP one, conversion and addition are made while
the target position for placement is being computed.
EUKYX
2-24199-3100
2.5 Head
2.5.2 Head-B
Pressing the [Head-B] tab on the "Head" window displays the following window.
[1] [2]
[3]
[4]
Graphic
Development
F3B32A
[1] Nozzle 1 through 15
In this section, each nozzle No. is displayed.
[2] Head 1 and Head 2
X (Horizontal) and Y (Vertical) [mm]
The set parameters are used to adjust the positional deviations of the nozzles caused due to the
movement of the nozzle U/D axes.
[3] [Standard] Button
When the applicable component is a standard one, conversion and addition are made while
the target position for placement is being computed.
[Lead] Button
When the applicable component is a leaded one, conversion and addition are made while
the target position for placement is being computed.
[BGA] Button
When the applicable component is a BGA/CSP one, conversion and addition are made while
the target position for placement is being computed.
[4] [Head 1 Clear] Button, [Head 2 Clear] Button
Using these buttons, the data parameters for all the nozzles in the corresponding head are
performed.