EUKYX-199-3100_G5S2_Instruction_Vol3_E.pdf - 第183页

EUKYX 2-35 199-3100 2.5 Head 2.5. 1 0 NL Dclr / L Dclr When the mach ine is equi p ped with the high-speed head, the fol lowi ng wi nd ow is displa yed by pressi ng the [NL Dcl r] tab on the "Head" window . The…

100%1 / 230
EUKYX
2-34199-3100
2.5 Head
2.5.9 Nozzle Incln
Pressing the [Nozzle Incln] tab on the "Head" window displays the following window.
Graphic
Development
F3B43A
Head 1 / Head 2
theta X [deg] / theta Y [deg]
These offsets are used to correct the deviations in the X and Y directions that will be caused due to
the inclination of the nozzle shaft while the NL-axis is moving down.
EUKYX
2-35199-3100
2.5 Head
2.5.10 NL Dclr / L Dclr
When the machine is equipped with the high-speed head, the following window is displayed by
pressing the [NL Dclr] tab on the "Head" window.
The X/Y deviation occurring during NL deceleration is corrected.
Graphic
Development
F3B44A
When the machine is equipped with the multi-functional head, the following window is displayed
by pressing the [L Dclr] tab on the "Head" window. The X/Y deviation occurring during L-axis
deceleration is corrected.
Graphic
Development
F3B44B
EUKYX
2-36199-3100
2.5 Head
2.5.11 Each Noz. Head Pivot Point
Pressing the [Each Noz. Head Pivot Point] tab on the "Head" window displays the following
window. The head rotation center per nozzle is corrected.
Graphic
Development
F3B4
8