EUKYX-199-3100_G5S2_Instruction_Vol3_E.pdf - 第45页
EUKYX 199-3100 Cont-1 Contents Page Chapter 1 Menus for Maintenance 1. Outline of Menus for Maintenance ..................................... ....... 1-1 2. MAINTENANCE ............................................. .....…
Safety Precautions
EUKYX-Safety
199-X100
Safe-36
Handling solvents (including solder and adhesive)
Cleaning organic solvents, such as isopropyl alcohol (IPA) and ethanol are used for the maintenance
of this machine (including optional units). Additionally, the solder paste printers, dispensers, and
some hybrid placers and flip bonders use solder, flux, or bond, etc. during normal production. Since
many of these materials include organic solvents, great care should be taken when handling them.
■
Cautions on handling solvents
1. Hazards to human health
Organic solvents constantly vaporize and contaminate the surrounding atmosphere. Inhaling or
coming in contact with organic solvent vapor may cause serious damage to human health.
2. Flammability
Organic solvents are highly flammable substances and can easily catch fire if handled improperly.
3. Adverse effects on machines
Some kind of solvent may deteriorate parts used in the machine, electric cable sheathes, and other
resin parts.
■
To avoid hazards of solvents
• Be careful not to inhale toxic vapors of solvents for extended periods.
• Do not use solvents near fire or flame. Keep solvents away from flame or fire.
• Use only the specified solvent in the correct manner. Do not reuse any solvent
repeatedly, and do not mix with other solvents or chemicals.
• Check the contents of the safety data sheet (MSDS/SDS), thoroughly notify
work personnel of toxicities of included chemical materials and measures to be taken in case
of an accident, and take necessary countermeasures.
• Use appropriate safety gear (safety goggles, protective gloves, and respiratory protective
devices) corresponding to the solvent or material types.
If no safety data sheets are supplied with solvents or materials you have purchased, be sure to
acquire the safety data sheets from the suppliers.
Note
6. Precautionary Items for Correct Operations
EUKYX
199-3100
Cont-1
Contents
Page
Chapter 1 Menus for Maintenance
1. Outline of Menus for Maintenance ............................................ 1-1
2. MAINTENANCE ....................................................................... 1-3
3. Unit Change ............................................................................ 1-4
3.1 Head Unit .................................................................................. 1-5
3.1.1 Attached Head Judgment Window ......................................... 1-6
3.2 Nozzle Stocker ...........................................................................1-7
3.3 Feeder Unit ................................................................................1-9
4. Unit Adj. .................................................................................1-11
4.1 NOZ. CHNG. ............................................................................ 1-12
4.2 SIDE VIEW CAMERA ............................................................... 1-15
4.2.1 Dtc t .Te s t ........................................................................... 1-16
4.2.2 Img list .............................................................................. 1-18
4.3 CONVEYOR ............................................................................ 1-19
4.3.1 Conveyor .......................................................................... 1-20
4.3.2 PCB Stpr. .......................................................................... 1-22
4.3.3 X Axis grease up ............................................................... 1-23
4.3.4 FDR BASE ........................................................................ 1-23
5. Shipment Adj. ........................................................................ 1-24
5.1 Side View Camera .................................................................... 1-26
5.2 NL-Axis Org Master Noz Lv ....................................................... 1-27
5.3 Chute Lv (Shipment/exchange) .................................................. 1-28
5.4 Cmp Recog Light...................................................................... 1-29
5.5 PCB Recog Light ...................................................................... 1-32
5.6 MARK LIGHT ........................................................................... 1-35
5.7 Cmp Recog Mag ...................................................................... 1-36
5.8 PCB Recog/Beam .................................................................... 1-38
5.9 Cmp Recog Pos ....................................................................... 1-40
5.10 Head Rotate Axis .................................................................... 1-42
5.11 Head Cntr Mark Pos ................................................................ 1-44
5.12 Fly Recog Camr ..................................................................... 1-48
5.13 Noz Stk Pos ........................................................................... 1-49
5.14 Noz Incln ................................................................................ 1-50
5.15 Noz Lv./Pos. ........................................................................... 1-52
5.16 Support pin Pos ...................................................................... 1-54
5.17 Master Noz Lv (Indv.) .............................................................. 1-55
EUKYX
199-3100
Cont-2
Contents
Page
5.18 Table Offset ........................................................................... 1-56
5.19 Self Calibration ....................................................................... 1-57
5.20 Slit Pos offset ......................................................................... 1-59
6. DVC Check ........................................................................... 1-60
6.1 INP / OUT ................................................................................ 1-61
6.1.1 InP Chk ............................................................................. 1-62
6.1.2 OutP Chk .......................................................................... 1-63
6.1.3 List Dsp ............................................................................ 1-64
6.2 MOTOR ................................................................................... 1-65
6.2.1 Operation .......................................................................... 1-66
6.2.2 Sys Info ............................................................................ 1-68
6.2.3 DI stop .............................................................................. 1-72
6.2.4 List ................................................................................... 1-74
6.3 RECOG ................................................................................... 1-77
6.3.1 Light Board ....................................................................... 1-78
6.3.2 Recog Light ....................................................................... 1-79
6.3.2.1 Cmp. Recog ............................................................... 1-80
6.3.2.2 PEC Recog ................................................................ 1-81
6.3.3 Capture Img. ..................................................................... 1-82
6.3.3.1 Cmp. Recog ............................................................... 1-83
6.3.3.2 PEC Recog ................................................................ 1-84
6.3.4 Count Board ...................................................................... 1-85
6.3.5 Others .............................................................................. 1-86
6.4 COM.STAT ............................................................................... 1-87
6.5 PRGM.INFO. ............................................................................ 1-88
6.5.1 Application ........................................................................ 1-89
6.5.2 MC Info ............................................................................. 1-89
6.5.3 Setup Log ......................................................................... 1-90
7. Maint.WM .............................................................................. 1-91
7.1 List .......................................................................................... 1-92
7.2 Oil ........................................................................................... 1-93
7.3 Upkeep .................................................................................... 1-94
7.4 Design ..................................................................................... 1-96
7.5 Feeder ..................................................................................... 1-97
8. Pass Operation (for Emergency) ............................................. 1-98