PathMaster-REV-L-4.5-1.pdf - 第12页
PathMaster PVA Revisi on K (20 19 ) 12 of 200 Sa fety Certain wa rning symb ols are a ffixed to the machine and corre spond to notation s in this manua l. Be fore operati ng the s ystem, iden tify the se warning lab els …
PathMaster
PVA
Revision K (2019)
11 of 200
Introduction
Before you operate this system, read the operation and setup manual. This
will help you to become familiar with the product and ensure successful
operation.
If any questions or problems arise, contact PVA’s Technical Support
department.
PVA Contact Information
Main Office PVA
One Mustang Drive
Cohoes, NY 12047
Tel +1-518-371-2684
Fax +1-518-371-2688
Website: http://www.pva.net
Email: info@pva.net
Technical Support
Tel +1-844-734-0209
Email: cs@pva.net
Document History
Revision
Revision Date
Reason for Changes
REV L
February 2020
Passwords updated, New Template
REV K
January 2019
4.5 PathMaster Release
REV J
May 2018
IP Addresses Added
REV I
May 2018
4.4 PathMaster Release
REV H
February 2018
Additional 4.3 Release Updates
REV G
February 2018
4.3 PathMaster Release
REV F
April 2017
Update of INI Content
REV E
March 2017
PathMaster 4.2 Release
REV D
October 2016
Added Notice on PathMaster.ini File
REV C
April 2016
Save for Part Manager and Motion Smoothing
REV B
January 2015
4.1 PathMaster Release
REV A
October 2013
Initial Release
Note: All photographs and CAD model representations in this document are a
“general representation” of the system and its components. The actual
appearance of the system and its components can differ based upon
customer specific configuration.
PathMaster
PVA
Revision K (2019)
12 of 200
Safety
Certain warning symbols are affixed to the machine and correspond to
notations in this manual. Before operating the system, identify these
warning labels and read the notices described below. Not all labels may be
used on any specific system.
Always wear approved safety glasses when you operate or work near
the workcell.
Before you operate the system, read and understand the manuals
provided with the unit.
Never put hands or tools in areas with this symbol when the machine
is in operation. A dangerous condition may exist.
Read and understand the manuals provided with the unit before any
repairs or maintenance is done. Only a qualified individual should do
service.
Use caution when there are pressurized vessels. Find and repair any
leaks immediately. Always wear appropriate safety equipment when
you work with pressurized vessels or vessels that contain chemicals
Shear hazard from moving parts. Avoid contact.
Do not remove protective guarding.
In situations where inattention could cause either personal injury or
damage to equipment, a warning notice is used.
PathMaster
PVA
Revision K (2019)
13 of 200
Do not smoke near the PVA UV cure machine. Always have a fire
extinguisher available for emergency use.
Before performing any repairs or maintenance to the system, turn off
power and lock out the power disconnect switch.
Warning notices are used to emphasize that
hazardous voltages,
current, temperatures, or other conditions that could cause personal
injury exist in this equipment or may be associated with its use. Only
qualified personnel should enter areas designated with this symbol.
Laser light source present. Do not stare directly into the beam. Do not
use in the presence of highly reflective surfaces
Pinch hazard from moving parts. Avoid contact.
Hot surface. Avoid contact.
Warning, Ultraviolet (UV) light hazard. Do not look directly at the UV
light source.