PathMaster-REV-L-4.5-1.pdf - 第14页
PathMaster PVA Revisi on K (20 19 ) 14 of 200 Theory of Operation This manual applies to the follow ing Preci sion Va lve & Automa tion, Inc. workcells: PVA 350™ PVA6000™ PVA6 50™ Delta 6 PVA2000™ Delta 8 PVA3000™ So…
PathMaster
PVA
Revision K (2019)
13 of 200
Do not smoke near the PVA UV cure machine. Always have a fire
extinguisher available for emergency use.
Before performing any repairs or maintenance to the system, turn off
power and lock out the power disconnect switch.
Warning notices are used to emphasize that
hazardous voltages,
current, temperatures, or other conditions that could cause personal
injury exist in this equipment or may be associated with its use. Only
qualified personnel should enter areas designated with this symbol.
Laser light source present. Do not stare directly into the beam. Do not
use in the presence of highly reflective surfaces
Pinch hazard from moving parts. Avoid contact.
Hot surface. Avoid contact.
Warning, Ultraviolet (UV) light hazard. Do not look directly at the UV
light source.
PathMaster
PVA
Revision K (2019)
14 of 200
Theory of Operation
This manual applies to the following Precision Valve & Automation, Inc.
workcells:
PVA350™ PVA6000™
PVA650™ Delta 6
PVA2000™ Delta 8
PVA3000™
Some features may not apply due to specific hardware and the version of
PVA Portal installed on the workcell. Please contact PVA for more
information. All machines are referenced in the manual as workcells. This
manual gives information on common options and configurations for a
workcell. The machine related to this manual may not contain all items or
may have additions. If the manual refers to an option that was not
purchased, ignore that section. If there are options on the workcell not
included in this manual, refer to the workcell manual for more information.
NOTE: Always wear gloves when handling materials and solvents. Refer to
MSDS sheets on the material dispensed for other precautions.
Waste Disposal
Dispose of all used parts and materials in accordance with local laws and
regulations.
PathMaster
PVA
Revision K (2019)
15 of 200
Hardware and Software Requirements
PathMaster® requires an Intel® Core i5 processor or equivalent processor
with 4 Gigabytes of RAM, 2 Gigabytes free hard drive space and Windows® 10
Operating System or newer. Your computer must also have:
• (2) Ethernet ports
• (1) RS232 serial communications
port
• 17” monitor with 1280 x 1024
resolution
• Mouse (USB) and 6’ extension cable
• Keyboard (USB) with a touch pad if
used with a PVA monitor mount
• Keyboard extension cable, 6’
• Monitor cable, 15’ (Display port or
DVI)
• Display port or DVI video support
(VGA cannot be used)
• CDROM drive
• PMInterface Version 1.05, if Portal is
used
• Support for Windows 10 LTSB or
Enterprise (Windows 10 Pro is not
supported)
NOTE: Portal may not work correctly with systems that do not meet these minimum
requirements.
Galil Controller Requirements
• Galil controller, DMC 4000/4200 with firmware revision
D400s08n/DMC4200s05h or newer. Controllers must be purchased from
PVA.
o A DMC2000 controller may be used, but the software may only be
configured for DMC2000 or Legacy modes.
Security Software
Some security software packages and firewalls can interfere with PVA system
software. PVA software uses Ethernet ports 23, 60007, and 502 by default. Security
software and firewalls must be configured to allow traffic on these ports.