PathMaster-REV-L-4.5-1.pdf - 第147页

Machine Operati on Manual Revision L / February 2020 Page 147 of 2 00 Sub routin e Cal l S election This option cha nges w hich subr outine wi ll be cal led at runtime . You must hig hlight t he subroutine to be cha nged…

100%1 / 200
Machine Operation Manual
Revision L /
February 2020
Page 146 of 200
Tool Parameters
Modify Tool Parameters
1. Select
Modify -> Tool Parameters.
2. Select either
Program
or
Selection.
3. For “Tool On” select either “No Change”, “Wait”, or “Distance”.
4. Enter the new value in the box to the right.
5. For “Tool Off” select either “No Change”, “Wait”, or “Distance”.
6. Enter the new value in the box to the right.
Figure 179: Modify Tool Parameters Window
7. Click “OK”.
The tool parameters have now been updated.
NOTE: If you change the tool parameters you override existing speeds pre-programmed in
the tool configurations. New commands will use the default tool configuration values.
NOTE: Only commands with the same tool may be selected at the same time. You may not
change multiple commands that have different tools at the same time.
Machine Operation Manual
Revision L /
February 2020
Page 147 of 200
Subroutine Call
Selection
This option changes which subroutine will be called at runtime. You must highlight the
subroutine to be changed or this modification will not work.
Modifying a Subroutine Call
1. Select
Modify -> Subroutine Call.
2. Select
Selection.
3. Select the necessary subroutine to replace the existing subroutine. Use the search
bar to help you find the new subroutine if necessary.
4. Click “Call”.
Figure 180: Select New Subroutine
The subroutine has been updated to the selected subroutine.
Machine Operation Manual
Revision L /
February 2020
Page 148 of 200
Area Spacing
Modify Area Spacing
1. Select
Modify -> Area Spacing.
2. Select either
Program
or
Selection.
3. Enter the new desired spacing in the text box.
Figure 181: Area Spacing
4. Click “OK.”
All selected areas now have an updated spacing.