PathMaster-REV-L-4.5-1.pdf - 第13页
PathMaster PVA Revisi on K (20 19 ) 13 of 200 Do not sm oke near the PV A UV c ure machine. Alw ays have a f ire extinguisher available for emer gency use. Be fore perfo rming a ny repa irs or mai ntenance to the sy stem…
PathMaster
PVA
Revision K (2019)
12 of 200
Safety
Certain warning symbols are affixed to the machine and correspond to
notations in this manual. Before operating the system, identify these
warning labels and read the notices described below. Not all labels may be
used on any specific system.
Always wear approved safety glasses when you operate or work near
the workcell.
Before you operate the system, read and understand the manuals
provided with the unit.
Never put hands or tools in areas with this symbol when the machine
is in operation. A dangerous condition may exist.
Read and understand the manuals provided with the unit before any
repairs or maintenance is done. Only a qualified individual should do
service.
Use caution when there are pressurized vessels. Find and repair any
leaks immediately. Always wear appropriate safety equipment when
you work with pressurized vessels or vessels that contain chemicals
Shear hazard from moving parts. Avoid contact.
Do not remove protective guarding.
In situations where inattention could cause either personal injury or
damage to equipment, a warning notice is used.
PathMaster
PVA
Revision K (2019)
13 of 200
Do not smoke near the PVA UV cure machine. Always have a fire
extinguisher available for emergency use.
Before performing any repairs or maintenance to the system, turn off
power and lock out the power disconnect switch.
Warning notices are used to emphasize that
hazardous voltages,
current, temperatures, or other conditions that could cause personal
injury exist in this equipment or may be associated with its use. Only
qualified personnel should enter areas designated with this symbol.
Laser light source present. Do not stare directly into the beam. Do not
use in the presence of highly reflective surfaces
Pinch hazard from moving parts. Avoid contact.
Hot surface. Avoid contact.
Warning, Ultraviolet (UV) light hazard. Do not look directly at the UV
light source.
PathMaster
PVA
Revision K (2019)
14 of 200
Theory of Operation
This manual applies to the following Precision Valve & Automation, Inc.
workcells:
PVA350™ PVA6000™
PVA650™ Delta 6
PVA2000™ Delta 8
PVA3000™
Some features may not apply due to specific hardware and the version of
PVA Portal installed on the workcell. Please contact PVA for more
information. All machines are referenced in the manual as workcells. This
manual gives information on common options and configurations for a
workcell. The machine related to this manual may not contain all items or
may have additions. If the manual refers to an option that was not
purchased, ignore that section. If there are options on the workcell not
included in this manual, refer to the workcell manual for more information.
NOTE: Always wear gloves when handling materials and solvents. Refer to
MSDS sheets on the material dispensed for other precautions.
Waste Disposal
Dispose of all used parts and materials in accordance with local laws and
regulations.