2OM-1075-002.pdf - 第172页
AHB01ESPP 5.3.4 T ab Sheets • • • • • Sheet Layout When the "PCB Origin Offset T each" tab is pressed in the "RECOV- ERY" window , the following tab sheet appears inside the window . Fig. 2E23-3 "…
AHB01ESPP
5.3.3 Examples
The P.C.B. origin offsets must be taught.
The P.C.B. origin offsets are used to specify the reference points for all
coordinates data that will be set up in the pattern program.
These offsets must be used for the pattern data that represents the
P.C.B.’s having blank sides (no patterns) on the mother board or for the
actual patterns that are all shifted to one side.
Fig. 2E23-2 Objects for P.C.B. Origin Offset Teaching
0308-002 5-25-11
5.3 "PCB Origin Offset Teach" Tab
O1
O2
Pn
TIM-X100R
TIM-X100F
P.C.B. Positioning
Reference
P.C.B. Origin Offset
Outline Pilot Pin
Pattern Origin
P.C.B. Origin
Unit Control
Offset
Outermost Outline of P.C.B.
Fiducial Mark for
Global
Recognition
Placement
Coordinates
Angle of Divided Pattern: 0°
Angle of Divided Pattern: 270°
Pattern Area
Pn
P.C.B. Positioning
Reference
P.C.B. Origin Offset
Outline Pilot Pin
Pattern Origin
P.C.B. Origin
Unit Control
Offset
Outermost Outline of P.C.B.
Placement
Coordinates
Angle of Divided Pattern: 0°
Angle of Divided Pattern: 270°
Pattern Area
O1
O2
Fiducial Mark for
Global
Recognition
AHB01ESPP
5.3.4 Tab Sheets
••
••
• Sheet Layout
When the "PCB Origin Offset Teach" tab is pressed in the "RECOV-
ERY" window, the following tab sheet appears inside the window.
Fig. 2E23-3 "PCB Origin Offset Teach" Tab Sheet
(Example: [P.E.C. Pos] Button Selected)
Fig. 2E23-4 "PCB Origin Offset Teach" Tab Sheet
(Example: [Place Pos] Button Selected)
0308-002 5-25-12
5.3 "PCB Origin Offset Teach" Tab
*2
*1
*3
*6
*8
*9
*4
*7
*5
*10
*11
*12
AHB01ESPP
••
••
• Sheet Composition
*1 "Test Mode" Group Box
One of the following options is selected to determine how to teach
the offsets for P.E.C. recognition.
[P.E.C. Pos] Button
When the global P.E.C. recognition function is used, the P.C.B. ori-
gin offsets are taught, using the first fiducial mark.
[Place Pos] Button
The P.C.B. origin offsets are taught, using the first point (first place-
ment coordinates) or arbitrary placement coordinates.
(a) The option "P.E.C. Pos" or "Place Pos" is automatically
selected according to the contents of the pattern program.
Table 2E6
Contents of Pattern Program Teaching Point
P.E.C. recognition mode Global Enable 1 Point (global P.E.C. recognition) or Specified
Placement Coordinates (Default: Fiducial mark
#1 (Placement Coordinates))
Disable Specified Placement Coordinates (Default: Fi-
ducial mark #1 (Placement Coordinates))
(b) When the global P.E.C. recognition function is used, the
first point (1 Point for "P.E.C. recognition mode Global") is
the teaching point. However, when the teaching is impos-
sible due to deterioration of the fiducial mark on the objec-
tive P.C.B., "Place Pos" must be selected.
(c) When the global P.E.C. recognition function is not used,
the first placement coordinates point is regarded as a
teaching point.
When the teaching operation cannot be performed
smoothly, try to select other placement coordinates.
*2 Indication of Coordinates
Indicated are the coordinates in the currently referred pattern pro-
gram and the teaching results (coordinates).
*3 [Temp Entry] Button
When pressed, this button registers the currently taught coordinates
temporarily.
0308-002 5-25-13
5.3 "PCB Origin Offset Teach" Tab
Note