2OM-1075-002.pdf - 第341页

AHB01ESPP *3 [Set] Button The feeder selected in "Feeder List" (*2) is set as the objective feeder No. for teaching. *4 [Return] Button When this button is pressed, the "Feeder No. Set" sheet closes a…

100%1 / 469
AHB01ESPP
5.1.4 "Feeder No. Set" Sheet
This sheet makes it possible to set the objective feeder No. for teaching.
••
••
• Sheet Layout
When the [Fdr. No.] button is pressed in the "Tape, Vib. Stick Teach
Pick-Up Pos. [Comp. Center Pos.]" or the "Tape, Vib. Stick Teach Ecc.
Pick-Up Pos. [Pickup Loc. Adj.]" sheet, the following sheet appears.
Fig. 2F80 "Feeder No. Set" Sheet
••
••
• Sheet Composition
*1 "Component Data Lookup Mode" Group Box
The provided buttons make it possible to specify the feeder base on
which the feeder to be taught is installed.
When the [Feeder Base #1], the [Feeder Base #3], or the [Feeder
Base #4] button is pressed, the feeders on the selected feeder base
are listed in "Feeder List" (*2).
*2 Feeder List
When one of the buttons in the "Component Data Lookup Mode"
group box (*1) is pressed, the feeders on the corresponding feeder
base are listed.
5.1 "Pick-Up Location" Tab
0308-004 6-108
*1
*3
*2
*4
AHB01ESPP
*3 [Set] Button
The feeder selected in "Feeder List" (*2) is set as the objective feeder
No. for teaching.
*4 [Return] Button
When this button is pressed, the "Feeder No. Set" sheet closes and
the "Tape, Vib. Stick Teach Pick-Up Pos. [Comp. Center Pos.]" or
the "Tape, Vib. Stick Teach Ecc. Pick-Up Pos. [Pickup Loc. Adj.]"
sheet appears.
••
••
• Operation Procedure
Follow the steps below to specify the feeder No. to be taught.
(1) Specify the feeder base.
The feeder Nos. on the specified feeder base are listed in "Feeder
List" (*2).
(2) Specify the feeder No.
In the case of the vibratory stick feeder, it is required to specify a
unit.
(3) Press the [Set] button (*3).
The objective feeder No. for teaching is determined.
(4) Press the [Return] button.
The "Feeder No. Set" sheet closes and the "Pick-Up Location" tab
sheet appears.
5.1 "Pick-Up Location" Tab
0206-003 6-109
AHB01ESPP
5.2 Library Teaching
This function enables the operator to automatically create component
library data or manually create and correct the component library data.
In addition, the recognition test function enables the operator to make a
test for verification of the component library data.
5.2.1 Outline of System
Fig. 2F81
5.2 Library Teaching
0206-003 6-110
Copy
Copy
NT100
CPU1/2
Recognition System
Library Teaching
Library Teaching & Editing
Test and Teaching Library
(Max. 100 pieces)
Component
Recognition Test
Hysteresis Test
Component Library for
Automatic Operation
Saving to NT
Up-loading to the main machine