2OM-1075-002.pdf - 第29页

Compound View (Fixed Camera) (Option) • For Large View Batch Front Lighting 2.0 × 1.2 to 46 × 34 mm Recognition Back Lighting 2.0 × 1.2 to 18 × 18 mm Recognition Divided Front Lighting Max. 55 × 55 mm Recognition See Not…

100%1 / 469
23. Editing and • Pattern program data can be edited, using the touch screen, the
Input of keyboard, and the pointing device.
Pattern • Pattern program data can be edited with the network terminal
Program Data (option).
• Data can be entered through the local area network (Ethernet) running
from the storage unit of the network terminal (option).
• Data Reading from Floppy Disk.
24. Pattern
• Data Display on Touch Screen
Program and
• Data Transfer to Storage Unit of Network Terminal (Option)
Management
• Data Saving on Floppy Disk
Data Output
25. Component Applicable Large View (Fixed Camera)
Recognition Component Size
Batch
Front Lighting
2.0 × 1.2 to 46 × 34 mm
Recognition
Back Lighting
2.0 × 1.2 to 18 × 18 mm
Recognition
Divided
Front Lighting Max. 55 × 55 mm
Recognition See Note below.
Maximum Component Thickness: 20 mm
Minimum Lead Pitch : 0.4 mm
Minimum Ball Diameter : φ0.4 mm
Minimum Ball Pitch : 0.55 mm
Small View (Movable Camera)
Batch
Front Lighting
1.0 × 0.5 to 24 × 18 mm
Recognition
Back Lighting
1.0 × 0.5 to 18 × 18 mm
Recognition
Maximum Component Thickness: 5 mm
Note: As for a component of 10 × 10 mm or less, up
to 6.5 mm is acceptable.
Minimum Lead Pitch : 0.3 mm
Minimum Ball Diameter : φ0.2 mm
Minimum Ball Pitch : 0.3 mm
Note: In the case of connectors, up to 100 × 26 mm
can be handled.
2. Specifications
0308-003 1-11 AHB01ESPP
Compound View (Fixed Camera) (Option)
• For Large View
Batch
Front Lighting
2.0 × 1.2 to 46 × 34 mm
Recognition
Back Lighting
2.0 × 1.2 to 18 × 18 mm
Recognition
Divided
Front Lighting Max. 55 × 55 mm
Recognition See Note a below.
Maximum Component Thickness: 20 mm
Minimum Lead Pitch : 0.4 mm
Minimum Ball Diameter : φ0.4 mm
Minimum Ball Pitch : 0.55 mm
• For Minimum View
Batch
Front Lighting 0.6 × 0.3 to 8.0 × 6.0 mm
Recognition See Note b below.
Back Lighting 0.6 × 0.3 to 8.0 × 6.0 mm
Recognition See Note b below.
Divided
Front Lighting Max. 20 × 20 mm
Recognition See Note b, c below.
Maximum Component Thickness: 20 mm
Minimum Lead Pitch : 0.10 mm
Minimum Ball Diameter : φ0.07 mm
Minimum Ball Pitch : 0.10 mm
Notes : (a) In the case of connectors, up to 100 × 26
mm can be handled.
(b) Use black reflective nozzles for the
smaller components than 1.0 × 0.5 mm.
(c) Only BGA components can be handled.
Photoimage Front Lighting System
(Direct Recognition of Component by Front Lighting)
Back Lighting System
(Recognition by Component Silhouette)
Notes: (a) The cameras are automatically selected according to the
shape and size of a component.
(b) The compound view unit (the fixed cameras for large/mini-
mum views) is optional.
Consult our marketing department or sales agency about
the installation and the combination, etc.
2. Specifications
0206-003 1-12 AHB01ESPP
26. P.E.C. View Approx. 16 × 12 mm
Recognition Ref.: Each head (Heads #1 and #2) is equipped
with a camera.
Window Size 1.0 × 1.0 to 5.0 × 5.0 mm
Photoimage Front Lighting System
(Recognition of Fiducial Mark by Front Lighting)
("Normal" or "Reverse" can be selected for each
mark.)
27. Fiducial Marks
Size: 0.5 to 3.0 mm or less
Others
Size: 1.0 to 2.0 mm or less
Others
Size: 0.5 to 2.0 mm or less
Material
• Copper Leaf
(Au and Ni plating possible but mirror surface cannot be used.)
• Solder Plating
(Consult our marketing department or sales agency for details.)
• Solder Leveler
(Consult our marketing department or sales agency for details.)
Notes: (a) A through hole or a pad mark should have only one land which
is directed in increments of 45°.
Consult our marketing department or sales agency for de-
tails.
(b) A fiducial mark should make ample contrast with the surround-
ings.
(c) A test may be required when the fiducial mark cannot be rec-
ognized because of the extreme warpage of the P.C.B.
(d) Anything resembling a pattern similar to a fiducial mark should
not exist in the designated window. If one exists, it may cause
false recognition.
The shape of P.C.B. (a cutout, a punched hole), the external
elements (light reflected from a structure, light emitted from
an external device, etc.) may sometimes interfere with rec-
ognition. Consult our marketing department or sales agency
for details.
(e) Consult our marketing department or sales agency for the
detailed information on the fiducial marks.
2. Specifications
Shape
Fiducial Marks
Through
Holes
Pad Mark
0206-003 1-13 AHB01ESPP