2OM-1075-002.pdf - 第459页

AHB01ESPP 8. "FILE OPN." Window (Submenu) • Window Layout When the [FILE OPN.] button on the submenu bar is pressed in the "MAINT ." window , the following window (submenu) opens. Fig. 2F145 "FIL…

100%1 / 469
AHB01ESPP
[M-LINK I/F] Button
When this button is pressed, the following sheet appears.
Fig. 2F144 "Machine Prgm. Info." Tab Sheet
([M-LINK I/F] Button Selected)
(Provided with Multi-Layer Tray Feeder 2)
The tab sheet may look different, depending on which options
are selected.
The information pane will show the software versions of the M-LINK
interfaces in each block (X #1 Axis, X #2 Axis, Y #1 Axis, Y #2 Axis,
L #1 Axis, L #2 Axis, Z #1 Axis, Z #2 Axis, BPC Axis and EV #2 Axis).
0206-003 6-220
7.2 "Machine Prgm. Info." Tab
Note
AHB01ESPP
8. "FILE OPN." Window (Submenu)
• Window Layout
When the [FILE OPN.] button on the submenu bar is pressed in the
"MAINT." window, the following window (submenu) opens.
Fig. 2F145 "FILE OPN." Window (Submenu)
• Window Composition
*1 Tabs and Tab Sheets
The "FILE OPN." window (submenu) is provided with the following
tab sheet.
Table 2F24
Tab Description
Save/Load This tab sheet enables the operator to save the machine data
on a 3.5-inch floppy disk in the drive of the service panel or load
the required data from the floppy disks where the machine sys-
tem data, the pattern program data, the placement head/nozzle
data, the nozzle data, etc., are saved.
8. "FILE OPN." Window (Submenu)
0206-003 6-221
*1
AHB01ESPP
8.1 "Save / Load" Tab
The corresponding tab sheet enables the operator to save or load the
machine data from the floppy in the drive of the service panel.
• Sheet Layout
When the "Save / Load" tab is pressed in the "FILE OPN." window
(submenu), the following tab sheet appears inside the window.
Fig. 2F146 "Save / Load" Tab Sheet
• Sheet Composition
*1 "Type" Group Box
The following buttons are provided in this group box.
[Machine Sys] Button : When pressed, this button enables the
operator to save the machine system
data on a floppy disk or load the data
from the corresponding floppy disk to
the hard disk of the machine.
[Pattern Prgm] Button : When pressed, this button enables the
operator to save the pattern program
data on a floppy disk or load the data
from the corresponding floppy disk to
the hard disk of the machine.
0206-003 6-222
8.1 "Save / Load" Tab
*1
*2
*3 *4