2OM-1075-002.pdf - 第201页

AHB01ESPP *2 Recognition Error Data The following items are displayed with respect to a component rec- ognition error . Comp ID : Displayed is the ID of the component in which a recognition error occurred. Fdr No. : Disp…

100%1 / 469
AHB01ESPP
6.6 "Recog. Image" Tab
The corresponding tab sheet enables the operator to save the recog-
nized images of component recognition errors on a floppy disk (inserted
into the drive on the service panel).
Error images can be saved on a floppy disk and sent to us for
error analysis.
• Sheet Layout
When the "Recog. Image" tab is pressed in the "RECALL" window
(submenu), the following tab sheet appears inside the window.
Fig. 2E34 "Recog. Image" Tab Sheet
• Sheet Composition
*1 Recognition Error Image
Displayed is the image of a component recognition error.
When this area is pressed, the image disappears.
0308-004 5-38
6.6 "Recog. Image" Tab
Note
*1
*3
*2
AHB01ESPP
*2 Recognition Error Data
The following items are displayed with respect to a component rec-
ognition error.
Comp ID : Displayed is the ID of the component in which a
recognition error occurred.
Fdr No. : Displayed is the feeder No. of the component in
which a recognition error occurred.
Cam No. : Displayed is the number of the camera that de-
tected a recognition error.
Mark No. : Displayed is the mark No. to be saved.
Recog Error ID : Displayed is the error code.
Description : Displayed is the description of the error.
Item : Displayed are the details of the error.
*3 "Data Save" Group Box
File Name : Enter the file name of the image data to be
saved.
[FD Save] Button : When this button is pressed, the image data
is saved on a floppy disk with the entered file
name.
0308-003 5-39
6.6 "Recog. Image" Tab
AHB01ESPP
Note
(a) Insert a formatted floppy disk (1.44MB DOS-formatted disk)
in the floppy disk drive of the service panel.
(b) Up to 3 image planes (resolution: 100%) can be saved on
one piece of floppy disk. (Excluding any divided recogni-
tion error)
(c) Do not press the eject button of the disk drive when the
access lamp is ON. Otherwise, the data stored on the in-
serted floppy disk may be corrupted.
(d) When the access lamp of the FDD extinguishes, it indi-
cates that the data is saved completely. Press the eject
button and take out the floppy disk from the disk drive.
(e) When the error image analysis must be performed on the
manufacture’s side, set the following before the image is
saved.
Set "1 (100% Resoln)" in the "# of images" text box of
"Recog error image save" in the "Auto Operation Setup"
tab sheet. (Operation Sequence: [SYSTEM] Button on Main
Menu Æ "SYS DATA" Menu Æ "Machine System Data"
Window Æ "Auto Operation" Tab Æ "Auto Operation Setup"
Tab)
Refer to "2.2 "Auto Operation" Tab" in "Section 5 System
Setting" of "Vol. 3: Programming and Machine Data" for
details.
6.6 "Recog. Image" Tab
0308-003 5-40